Advanced Diploma in Civil Engineering Technology (Optional Co-op)

at Conestoga College - Cambridge Campus Canada

This program provides a pathway to popular School of Engineering technology programs and has been designed with student success in mind. With attention to fundamental academic skills, students develop academic readiness and are provided with opportunities for guaranteed admission to a range of engineering technology (diploma) programs.A variety of technology disciplines are incorporated, enabling students to make informed choices about career paths in technology. The curriculum is designed to provide a balanced education in applied mathematics, physics, introduction to technology, communication, computer applications, career development, and general education. Students will have an opportunity to acquire the knowledge and skills necessary to prepare them for the challenges of higher education in the technology field. One course in each semester is dedicated to introducing students to a wide variety of engineering technology disciplines through hands-on activities and speakers from these fields.Graduates are guaranteed entry into the next first-year intake of a specified engineering technology program provided they have simultaneously applied through www.ontariocolleges.ca, earned all credits and have achieved a minimum program average of 65%, including a minimum 65% average of both math courses.
 

In this diploma program, students gain skills for a career in today's automated manufacturing setting. In addition to developing a thorough knowledge of numerically controlled manufacturing systems, students will acquire a comprehensive background in general manufacturing and design fundamentals. This broad?based curriculum includes: learning and applying numerical control (NC) programming concepts; utilizing CAD/CAM techniques to integrate design and manufacturing; an introduction to the world of robotics; an introduction to designing power-transmitting devices and developing and applying quality assurance process planning and production control techniques to the solution of practical manufacturing problems. Today's effective technician is also a skilled communicator, and students will learn to communicate technical information at all levels through the use of linguistic, graphic and computerized methods. There is a common first two years with the Mechanical Engineering Technology (Automated Manufacturing) program. The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Technician (C.Tech.) category.The optional co-op stream includes two co-op work terms.

Embedded Systems Development (ESD) is a four-semester graduate certificate program including a one-semester exploration of career management or an optional co-op in the embedded systems industry. The program is aimed at providing the student with a solid understanding of the embedded systems industry, gaining hands-on skills in the development (design and implementation) of both hardware and software for embedded systems.The program integrates a hands-on, practical approach to augment theoretical knowledge a student may already have coming into the program. Applied projects and lab work help prepare graduates for a career in embedded systems development. The optional co-op stream includes one co-op work term instead of the Guided Career Management course. 

The Packaging Engineering Technician program provides training in the structural design of packaging materials. Students will learn to design packaging utilizing different materials: metal, glass, plastic, paper, and corrugated. Critical in the design of any packaging are product protection (safety and security), durability, the ability to recycle materials, and sustainability opportunities and issues. The delivery of the program includes approximately 10% online courses. The optional co-op stream includes one co-op work term.

Applying to the Co-op Stream
All applicants apply to the non co-op program. Students will be informed of the application deadline and process to apply for the Co-op Stream. Labour market conditions determine the number of co-op seats in optional co-op programs. Every student who meets academic eligibility requirements may not be admitted to the co-op stream.
To be considered for admission to the co-op stream, students are required to achieve a minimum 70% session weighted average and no failed or dropped courses in Level 1.

Co-op Information
Co-op programs add value to your education. Earn while you apply what you learn in a real workplace environment. See the Co-op webpages.
The College cannot guarantee co-op employment. All co-op students are required to conduct an independent co-op job search in addition to the supports and services provided by the Department of Co-op Education.
Students are responsible for their own transportation and associated costs in order to complete work term requirements. Work locations may not always be readily accessible by public transportation.

The Structural Packaging Design & Management program is a one-year graduate certificate designed to provide students with the skills and knowledge to design and manage the production of packaging in a variety of materials including metal, glass, plastic, paper and corrugated. Students will study critical aspects of structural packaging design and management: product protection (safety and security), durability, the ability to recycle materials, sustainability opportunities and issues, and best management practices in a manufacturing environment. Significant career opportunities exist across many sectors of industry.

This diploma program features co-operative education with six academic terms at the College and three work terms in industry. Studies combine theoretical knowledge with applied skills in the control of robotic and automated equipment using electronics, programmable automation controllers, computers, hydraulics and pneumatics.

In addition, the program focuses on the development of skills in computer-aided design, mechanical technology, electric motors, servo-mechanisms, robotics, industrial automation, and safety standards.
Emphasis is placed on effective techniques for designing, modifying, installing, testing, maintaining, repairing and troubleshooting equipment and systems. Effective communication is also stressed.

The Robotics and Automation program culminates in a third-year capstone project in which all the skills learned at school and on work terms are integrated into the proposal, design and construction of a fully functioning manufacturing work cell. The optional co-op stream includes three co-op work terms.

The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Engineering Technologist (CET) category.

Applying to the Co-op Stream
All applicants apply to the non co-op program. Students will be informed of the application deadline and process to apply for the Co-op Stream. Labour market conditions determine the number of co-op seats in optional co-op programs. Every student who meets academic eligibility requirements may not be admitted to the co-op stream.
To be considered for admission to the co-op stream, students are required to achieve a minimum 65% in Level 1 with a maximum of one dropped or failed courses and must pass MECH1050.

Co-op Information
Co-op programs add value to your education. Earn while you apply what you learn in a real workplace environment. See the Co-op webpages.
The College cannot guarantee co-op employment. All co-op students are required to conduct an independent co-op job search in addition to the supports and services provided by the Department of Co-op Education.
Students are responsible for their own transportation and associated costs in order to complete work term requirements. Work locations may not always be readily accessible by public transportation.

Wireless Network Infrastructure

This program prepares graduates with degrees or diplomas in telecommunications, electronics, or computer engineering/technology for work in emerging fields in the wireless telecommunications industry. Students will enhance their undergraduate knowledge with practical skills that include the use of industry standard tools (drivetest tools, propagation tools, spectrum analyzers, network analyzers, etc.), and the techniques required for success in the wireless industry. Students will broaden their familiarity with troubleshooting and the configuration of local area and wide area networks (LANs and WANs) and networking topics relevant to telecom carriers including virtual private networks, quality of service, and others. Cutting-edge topics which include long term evolution (LTE) and 5th generation wireless networks, high bandwidth wireless (WiGig+) and concurrent MIMO systems, will ensure that graduates will be in high demand. 

Information Technology Network Security

Information technology and network infrastructure are targets for malicious activity on a regular basis. News reports about data breaches, security violations, privacy failures and other infrastructure failures highlight a growing threat to business and personal information. This one-year, full-time, graduate certificate program is designed to address this growing threat to our network infrastructure. It will provide students with the security background in network technologies, computing hardware, operating and protocols, to harden and further secure such systems from attack. Students will learn to identify threats through audits and supporting technical methods, as well as evaluate and develop appropriate policies to support a strong organizational security posture. This program offers skills that allow graduates to evaluate risk and design infrastructure solutions that keep a business’s code, data and network systems safe.

This dynamic three-year program gives the student broad and thorough training in all phases of the building industry. The training is directly related to industry standards and working conditions, with challenging projects encompassing building design, building performance, working drawings, building systems, estimating, building-code analysis, specifications, and building information modelling (BIM). Founded on project-based learning principles, the program uses discussion groups, seminars, field trips and practical assignments. Sustainable design and construction practices form the core of this program and cover such topics as structure, building envelope, whole building and universal design, building science, indoor environment systems, building economics, sustainability, renewable energy and energy efficiency. Faculty are highly qualified specialists with current and relevant field experience. The local industry actively supports this program and is used as a teaching resource. The optional co-op stream includes two co-op work terms.The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Engineering Technologist (CET) category.

The Bachelor of Engineering - Electronic Systems Engineering (ESE) program, delivered at the honours level, is accredited by the Canadian Engineering Accreditation Board (CEAB) allowing students to start on the path to becoming a professional engineer. It is a unique, project-based, paid co-op program that allows students to apply the high level of theory they learn to interesting, real-world projects. It is geared to motivated individuals looking for challenging careers in the dynamic and fast-paced world of digital and analog electronics, embedded systems, software, signal processing, and communication systems.

Students in this unique 30-week program will receive a thorough hands-on and theoretical education in the welding field, preparing them for a successful career in this industry. This program follows the curriculum of the provincial trades Welder (456A) and Metal Fabricator - Fitter (437A) and successful students will be provided the opportunity to challenge provincial exemption exams for Level 1 of the in-school training providing them with a headstart into an apprenticeship. This practical education is complemented with courses in computer applications, computer-aided design (CAD), and technical communications.