Advanced Diploma in Mechanical Engineering Technology in Design and Analysis (Co-op Optional)

at Conestoga College - Cambridge Campus Canada

This diploma program features co-operative education with six academic terms at the College and three work terms in industry. Studies combine theoretical knowledge with applied skills in the control of robotic and automated equipment using electronics, programmable automation controllers, computers, hydraulics and pneumatics.

In addition, the program focuses on the development of skills in computer-aided design, mechanical technology, electric motors, servo-mechanisms, robotics, industrial automation, and safety standards.
Emphasis is placed on effective techniques for designing, modifying, installing, testing, maintaining, repairing and troubleshooting equipment and systems. Effective communication is also stressed.

The Robotics and Automation program culminates in a third-year capstone project in which all the skills learned at school and on work terms are integrated into the proposal, design and construction of a fully functioning manufacturing work cell. The optional co-op stream includes three co-op work terms.

The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Engineering Technologist (CET) category.

Applying to the Co-op Stream
All applicants apply to the non co-op program. Students will be informed of the application deadline and process to apply for the Co-op Stream. Labour market conditions determine the number of co-op seats in optional co-op programs. Every student who meets academic eligibility requirements may not be admitted to the co-op stream.
To be considered for admission to the co-op stream, students are required to achieve a minimum 65% in Level 1 with a maximum of one dropped or failed courses and must pass MECH1050.

Co-op Information
Co-op programs add value to your education. Earn while you apply what you learn in a real workplace environment. See the Co-op webpages.
The College cannot guarantee co-op employment. All co-op students are required to conduct an independent co-op job search in addition to the supports and services provided by the Department of Co-op Education.
Students are responsible for their own transportation and associated costs in order to complete work term requirements. Work locations may not always be readily accessible by public transportation.

This one-year full-time Ontario College Graduate Certificate program is designed for students who have completed a degree or diploma in science or engineering, and who want to pursue for a supervisory position in the food manufacturing industry. The program offers a suite of courses designed to developskills and knowledge with direct applicability in the food manufacturing environment. You will integrate leadership concepts in communication, problem-solving and decision-making. Course materials will be applied in a food manufacturing pilot plant environment and students will be exposed to operations in local industries. You will use continuous improvement including lean six sigma, project management, equipment maintenance, food safety and quality assurance to design systems that lead to excellence in manufacturing.

This program provides a pathway to popular School of Engineering technology programs and has been designed with student success in mind. With attention to fundamental academic skills, students develop academic readiness and are provided with opportunities for guaranteed admission to a range of engineering technology (diploma) programs.A variety of technology disciplines are incorporated, enabling students to make informed choices about career paths in technology. The curriculum is designed to provide a balanced education in applied mathematics, physics, introduction to technology, communication, computer applications, career development, and general education. Students will have an opportunity to acquire the knowledge and skills necessary to prepare them for the challenges of higher education in the technology field. One course in each semester is dedicated to introducing students to a wide variety of engineering technology disciplines through hands-on activities and speakers from these fields.Graduates are guaranteed entry into the next first-year intake of a specified engineering technology program provided they have simultaneously applied through www.ontariocolleges.ca, earned all credits and have achieved a minimum program average of 65%, including a minimum 65% average of both math courses.
 

Students of the Electrical Engineering Technician program learn a full range of electrical skills enabling them to work in a wide variety of electrical engineering areas including power systems and automation control systems. As well as acquiring a solid foundation of knowledge, students gain maximum career flexibility and the opportunity to explore several avenues in the electrical field. Students gain experience with electric motors, controls, PLCs, transformers and their industrial applications. Knowledge of electrical theory is supplemented by practical applications in power systems, industrial solid state controls, instrumentation, programmable logic controllers and motor control systems. Students work with heavy electrical motors, generators and transformers, learning a variety of industrial applications.Special emphasis is placed on writing, implementing and troubleshooting PLC programs, and communicating technical information effectively.Graduating students perform technological functions in various aspects of the energy field, primarily in support of research, development and design at a recognized technologist level.The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Technician (C.Tech.) category. 

This dynamic two-year graduate certificate is designed to give students specialized and thorough training in the detailing, supply, fabrication and installation of steel structures including the management and coordination of projects. The training is directly related to industry standards and working practices within North America and will enable students to develop detailed drawing, analytical and communication skills for the structural steel industry. Students will learn CAD skills, building information modelling (BIM), building code requirements, specifications and estimating to assist them with challenging projects. Faculty are highly qualified specialists with current and relevant field experience. The optional co-op stream includes one co-op work term which replaces the Career Management course.This program is available to be taken on a full-time or part-time basis. Courses will be scheduled in the afternoon and early evening to facilitate students who wish to take the program on a part-time basis while currently employed. Courses may also be scheduled to be delivered on Saturdays. Admission is available in January only. Bridging opportunities are available for trades. 

The Environmental Building Sciences program is a one-year graduate certificate designed to provide students with the skills and knowledge to effectively manage indoor environmental conditions throughout the building life cycle encompassing the identification, testing and remediation of problems in the building environment. Students will study building sciences, sustainability and energy management for building design and control, environmental legislation, air and water quality, assessment for communication of risk, hazardous materials assessment and abatement, sampling and testing methodologies, and project management and technical report writing. The program is experiential in nature with the incorporation of exercises, case studies, and practical laboratories in building sciences. In the final term, students will participate in a major project to address a present-day building environmental issue. It was developed in consultation with representatives from the environmental industry. For more information, contact the Program Coordinator at [email protected]. This program is available to be taken on a full-time or part-time basis. Courses will be scheduled in the afternoon and early evening to facilitate students who wish to take the program on a part-time basis while currently employed.

In this diploma program, students gain skills for a career in today's automated manufacturing setting. In addition to developing a thorough knowledge of numerically controlled manufacturing systems, students will acquire a comprehensive background in general manufacturing and design fundamentals. This broad?based curriculum includes: learning and applying numerical control (NC) programming concepts; utilizing CAD/CAM techniques to integrate design and manufacturing; an introduction to the world of robotics; an introduction to designing power-transmitting devices and developing and applying quality assurance process planning and production control techniques to the solution of practical manufacturing problems. Today's effective technician is also a skilled communicator, and students will learn to communicate technical information at all levels through the use of linguistic, graphic and computerized methods. There is a common first two years with the Mechanical Engineering Technology (Automated Manufacturing) program. The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Technician (C.Tech.) category.The optional co-op stream includes two co-op work terms.

This program focuses on the field of Mechatronics from an industrial maintenance perspective. We will provide you with a combination of training in both electrical and mechanical maintenance including applications in automated manufacturing systems, industrial robotics, and system integration. The focus on creating highly technical mechatronics maintenance team members from this program, will allow you to integrate into a variety of industries with knowledge in Industry 4.0/IIOT, mobile robotics, and big data. This program covers all the learning outcomes for Levels 1 and 2 of the Electrician and Millwright apprenticeship programs in Ontario. Students who pursue an apprenticeship in either trade may be exempt from these levels of in-school training. The optional co-op stream includes one paid co-op work term.

Applying to the Co-op Stream
All applicants apply to the non co-op program. Students will be informed of the application deadline and process to apply for the Co-op Stream. Labour market conditions determine the number of co-op seats in optional co-op programs. Every student who meets academic eligibility requirements may not be admitted to the co-op stream.
To be considered for admission to the co-op stream, students are required to achieve a minimum 70% session weighted average and no failed or dropped courses in Level 1.

Co-op Information
Co-op programs add value to your education. Earn while you apply what you learn in a real workplace environment. See the Co-op webpages.
The College cannot guarantee co-op employment. All co-op students are required to conduct an independent co-op job search in addition to the supports and services provided by the Department of Co-op Education.
Students are responsible for their own transportation and associated costs in order to complete work term requirements. Work locations may not always be readily accessible by public transportation.

• ARCHITECTURE – building planning, design, occupancy, to the adaptive re-use of buildings.
• PROJECT MANAGEMENT - based on construction management with strong links to PMI content.
• SUSTAINABILITY - from design to facility operations from core initiatives such as LEED, Green Globes, BOMA BEST, and ASHRAE to ideas of net zero buildings.
• FACILITY MANAGEMENT - the impact on a business of design, construction and operations of facilities.
• TRANSFERABLE SKILLS - APFM program of study offers a high level of highly transferable job skills.
• TRANSFERABLE SKILLS - APFM program of study offers a high level of highly transferable job skills.APFM is a dynamic four-year, paid co-op degree, delivered at the honours level. Students are able to write the Certified Associate in Project Management (CAPM) exam in year three and graduates are eligible to apply for Project Management Professional (PMP) certification after related work experience and writing the PMP exam. This program is accredited by the International Facility Management Association (IFMA) and graduates are eligible to become Certified Facility Managers after three years work experience. This program is the only one of its kind in Canada, highlighting both project management and facility management. In a unique project-based learning environment, students learn and apply their knowledge to real-world projects using creativity and critical problem solving. Students will gain strong foundations in architecture, construction, basic engineering, and business management with comprehensive insight into project and facility management. Additionally, they will be exposed to liberal arts disciplines and practical applications for the business enterprise. Graduates entering the workforce will have unsurpassed highly transferable skills in leadership, teamwork, and individual initiative in addition to their discipline-specific knowledge and practical skills. The opportunity exists for students who have completed a related advanced three-year diploma program to bridge or transfer into the third year of this program.

Students will gain broad-based mechanical engineering technology skills to prepare for career opportunities in today's increasingly complex and sophisticated industry. Studies emphasize mechanical design using standard procedures, computer graphics and computer-based analysis. Students also study manufacturing processes and materials to understand the integration between design and manufacturing. Effective technical communications through verbal, written, graphic and computer skills are also stressed. 

The Ontario Association of Certified Engineering Technicians and Technologists (OACETT) conditionally recognizes this program as meeting all the academic requirements for certification in the Certified Engineering Technologist (CET) category.

Co-op Information
Co-op programs add value to your education. Earn while you apply what you learn in a real workplace environment. See the Co-op webpages for more details.
The College cannot guarantee co-op employment. All co-op students are required to conduct an independent co-op job search in addition to the supports and services provided by the Department of Co-op Education.
Students are responsible for their own transportation and associated costs in order to complete work term requirements. Work locations may not always be readily accessible by public transportation.