Diploma in Forestry Technician (Co-op Optional)

at Fleming College - Frost Campus (Lindsay) Canada

Are you passionate about the environment, with a strong belief in sustainable practices? In this unique, post-graduate program you will learn to develop and implement innovative waste management plans and strategies based on new and emerging technologies and concepts.

PROGRAM HIGHLIGHTS
Waste is one of the leading problems of our time – increasing waste volumes, increasing severity of impact and costs of waste management and the challenge of managing waste in developing countries and emerging markets are causing a dramatic shift in waste management practices within Ontario and world-wide. Countries around the globe are moving towards a circular economy and waste has to be dealt with in new, innovative ways rather than simply sending it to landfill. The new Waste-Free Ontario Act makes producers responsible for their waste management. Failure to take action in managing waste has economic, environmental, social as well as health and safety implications, including toxic discharge leading to pollution, increased greenhouse gas emissions, increased frequency of illnesses, and the loss of valuable resources.

The Sustainable Waste Management program is being offered exclusively at the School of Environmental and Natural Resource Sciences - it is the only college program in Ontario that is focused on building advanced knowledge and skills in sustainable waste management.

• The training will lead graduates to meaningful careers. You will be well-versed in the relevant legislation and existing as well as emerging technologies, with the skills to effect changes in how business and industry manage their waste and how to move them beyond the three R’s of waste management.
• The program focusses on solid waste management, but does include courses that address hazardous waste management.

This program focuses on the "non-climbing" aspects of urban forestry and landscape care. You can help make our cities a better place to be after completing the Urban Forestry Certificate.

Program Highlights
Trees clean the air and provide much needed "green" relief from the concrete jungle.
You will learn how to care for urban trees and tree canopies, and gain a basic understanding of the landscape industry. As an Urban Forestry graduate, you'll be able to work maintaining and preserving trees and shrubs in the urban landscape and green spaces of our communities.

• You'll have the theoretical and practical knowledge to work on all aspects of urban tree care.
• While this program emphasizes the non-climbing aspects of tree and landscape care, you'll be able to operate, maintain, and troubleshoot chainsaws, wood chippers, stumpers, and other relevant mechanical equipment.
• You will be able to identify approximately 140 species of trees and shrubs in both summer and winter conditions.
• In order to better protect trees and shrubbery, you will be able to diagnose and remedy major pests, disease, and tree disorders - using the latest techniques and treatments to promote plant health.

Why Choose Fleming
Simply put, students choose Fleming College because of our reputation in the industry. Employers look to our Urban Forestry and Arboriculture programs to find well-trained graduates. The School of Environmental and Natural Resource Sciences has a 40-year plus reputation among professional organizations and employers working in the field.

Work Experience
From start to finish, the Urban Forestry program is hands-on. You'll be spending a lot of time working with trees and shrubs outside in addition to your time in the classroom. In the first semester, you will do a field placement, and be able to put your learning and practice to work.

The Outdoor and Adventure Education diploma program blends the development of people skills with the technical skills of outdoor pursuits, a dynamic combination that allows graduates to thrive in outdoor education and recreational settings. The program utilizes an experiential learning approach to teaching, allowing students to graduate with a solid resume of outdoor field experiences, certifications as well as other important skills such as facilitation, nature interpretation and adventure-based education strategies.

Trained outdoor leaders and facilitators offer safe, fun and educational outdoor programs and activities. These unique opportunities enable individuals or groups to stretch themselves physically, emotionally and socially in a supportive atmosphere. During this program, you will:

Improve your technical outdoor skills by participating in field courses such as, rock climbing, Nordic skiing, mountain biking, backpacking and bush craft.
Obtain certifications such as ORCKA Flat Water Canoeing Tandem and Solo, Certified Hike Leader, Wilderness First Responder, Ice Safety and Royal Lifesaving Bronze Cross.
Take courses covering diverse subjects including trip planning, risk management, trails design and construction, customer service and leadership.
Improve technical skill competencies in wilderness navigation, menu planning and cooking as well as knots, weather predicting and back country camping.
Increase your nature-based identification skills and improve your ecological and environmental awareness.

If you have a love for the outdoors, a keen interest in fish and wildlife, and a commitment to responsible resource management, then the Fish and Wildlife Technician/Technology program may be for you.

The purpose of fish and wildlife management is to ensure that quality habitat exists in sufficient quantity for wild populations to flourish and, for game species, that they are managed in a sustainable manner. This requires knowledge not only about animals, but about their habitats and how people interact with them. Consequently, fish and wildlife management has evolved into a multidisciplinary science-based profession that takes our graduates in many directions, across Canada and beyond.

Program Highlights

• The theory and skills required by fish and wildlife professionals are taught through applied learning activities with a significant amount of time doing hands-on work in the lab and field.
• Third-semester students spend five weeks in field school, focusing on the topics of fisheries, wildlife, terrestrial habitats, wetlands, and freshwater ecology. These field schools introduce new skills such as: boat handling, GPS navigation, fish netting, sampling and tagging, electrofishing, habitat assessment, wetland classification, bird banding, and use of wildlife monitoring technologies. Through these activities, students will work together to collect, analyze and present the data over the remainder of the technician-level education and training.
• During field excursions you will learn about the logistics involved in the design and implementation of field projects.
• You will also spend considerable time in the outdoors learning mammal, bird, reptile, amphibian, fish and plant identification skills, tracking animals and conducting wildlife surveys.

Optional Co-op
Students entering the program in September may apply to participate in an optional paid co-op. The deadline to apply is at the end of November, where students must submit an Application Form (including a resume) to the Co-op Office. Students must achieve a 70% (2.5 GPA) average, and pass all courses in Semester 1 in order to be enrolled in the Co-op Option. Students who are accepted will participate in a Career Preparation course, and will do their co-op between semesters 2 and 3. The Co-op Option provides the opportunity to:

• Integrate classroom learning with work-based learning
• Explore the variety of careers available in the field
• Network for future job opportunities

The Co-op Option is not available for students who begin the program in January, as they attend classes over the summer..

Why Choose Fleming

• Fleming College Fish and Wildlife Technician/Technology graduates have been the number one choice for employers in our industry for many years.
• Program graduates are eligible for advanced standing entry into many universities and can often complete a degree with two years of study.
• Fleming is one of only two colleges in the province offering a Fish and Wildlife program, and the only one located in southern Ontario.
• The comprehensive, challenging training you'll receive in this program, facilitated by faculty with experience in the field, ensures that you will obtain the well-rounded, relevant skills employers are seeking.

Pathway Program
If you do not meet the admission requirements for Fish and Wildlife Technician, consider the General Arts and Science - Environmental and Natural Resource Studies Option. This pathway program may provide the requirements you need for admission, while you earn credit for first semester of Fish and Wildlife Technician.

PROGRAM HIGHLIGHTS
Throughout your Heavy Equipment Techniques program, you will study the overhaul, maintenance and repair of heavy equipment. Upon completion, you will have a comprehensive background in mechanical studies, preventative maintenance, safe shop practices, and equipment management systems.

WHY CHOOSE FLEMING
Studying Heavy Equipment skills at Fleming College pays off in several ways:

We are known for our up-to-date equipment, quality programs, high industry placement rate, and skilled, knowledgeable instructors.
Excellent relationships with the industry mean jobs - linking students to potential employment opportunities upon graduation.
Heavy Equipment Techniques students will have the opportunity to write 3 Levels of the Heavy Equipment Technician Exemption Common Core tests. Successful completion of the three examinations (70% minimum) will satisfy all in-school apprenticeship requirements for completion of a 421A Heavy Duty Equipment Technician apprenticeship, two levels of the 425A Agricultural Equipment Technician and 282E Powered Lift Truck Technician apprenticeships, and one level of the 310T Truck and Coach Technician apprenticeship.

Our School offers the only college program in Canada providing training in Drilling, and we are the only program in the world offering training in so many of the different types of drilling. Numerous sectors rely on drilling skills, so this program opens doors to huge opportunities, many employers, and options to choose which field of drilling you will focus on. Our grads are in high demand. Every year, national and international employers recruit at our on-campus job fairs, and many of our students have employment offers before they graduate.

Currently, these fields offer employment opportunities for drilling careers:

• Construction Drilling and Blasting
• Geotechnical Drilling
• Environmental Drilling
• Water Well Drilling
• Resources Drilling, including minerals and oil and gas exploration
• Horizontal Directional Drilling

In our program, you'll learn the foundational theory, techniques and methods relating to each of these types of drilling, with an emphasis on safe working practices, while you learn to operate a full range of drilling equipment hands-on.

OPTIONAL CO-OP
Students entering the program in September may apply to participate in an optional paid co-op. The deadline to apply is at the end of November, where students must submit an Application Form (including a resume) to the Co-op Office. Students must achieve a 70% (2.5 GPA) average, and pass all courses in Semester 1 in order to be enrolled in the Co-op Option. Students who are accepted will participate in a Career Preparation course, and will do their co-op between semesters 2 and 3. The Co-op Option provides the opportunity to:

• Integrate classroom learning with work-based learning
• Explore the variety of careers available in the field
• Network for future job opportunities

The Co-op Option is not available for students who begin the program in January, as they attend classes over the summer.

WHY ARE DRILLING SKILLS IN DEMAND?
People may assume that resources drilling, such as for minerals and oil and gas exploration, is the sector where most graduates find work. In fact, there are numerous types of drilling required for a variety of industries and projects, with excellent job prospects:

• Geotechnical Drilling is required before any large construction project can begin. This involves subsurface investigations to evaluate property for infrastructure development, drilling for soil samples, determining soil type and depth, and ground conditions.
• Construction Drilling includes drilling foundations and anchoring piles for bridges, roadwork, or for any large building or development.
• Environmental Drilling involves obtaining samples of soil and groundwater, to control or remediate contaminants. Sites such as fuel service stations, landfills, mining operations, or abandoned infrastructures are examined, to either monitor or to reclaim the land for other purposes.
• Drilling skills are essential for water well design, installation and monitoring.
• Horizontal Directional Drilling is used to drill underneath structures such as roadways, foundations, or other properties, or beneath lakes, rivers or streams. The goal is to create a below-ground conduit, providing a transportation solution for waterlines, electrical lines, pipelines, or fibre-optic cables, for example.
• Geothermal Drilling, to install geothermal heating or cooling systems, is another growing field.

THE SKILLS YOU NEED TO SUCCEED
Our well-rounded program provides the courses and hands-on experience you need to begin a career in this exciting and varied sector. A full 80% of the program consists of practical learning sessions - in our state-of-the-art, on-campus Parnham Training Centre, and off-campus in the field. You'll also be challenged to think on your feet and use your problem-solving skills.

• You'll work on a full range of drilling equipment in our five service bays.
• Four specially equipped classrooms/labs feature everything from a drilling simulator to hands-on drilling activities.
• Course work includes an introduction to emerging fields, such as the geothermal industry.
• You'll get industry recognition for your studies. Our grads are exempt from taking the mandatory Ontario Ministry of the Environment 10-day Water Well Constructed Course. (Ontario Regulation 903 requires successful completion of this training for new well technicians.)

WHY CHOOSE FLEMING

• Our unique program offers a rare combination of technical training, theory and hands-on experience. Due to our strong connections with the industry, and our geographical location, the program is well positioned to place graduates throughout North America and globally. Employers know our grads have a good foundation of theory and practice, as well as excellent transferrable skills to draw upon for any challenge in the workplace.

WORK EXPERIENCE

• Following your first semester, you'll begin to explore specialized training in drilling. As mentioned, you'll spend most of your time in labs or field classes, putting your education to work and refining your skills. You'll also take part in field assignments in local quarries and job-related activities. Practical experience in semester four is subject to a criminal records check as required by field placement site management.

Graduates of our Earth Resources Technician program are often the employees of choice for major companies in the growing and wide-ranging earth resources and geotechnical sector.

PROGRAM HIGHLIGHTS
Are you interested in being paid to travel? Or working in your community? Are you seeking a hands-on career? Then geoscience is for you. Fleming College is the only college that offers a BLEND OF GEOLOGY, MINERAL EXPLORATION, ENVIRONMENTAL, AND ENGINEERING TECHNIQUES IN ONE PROGRAM. It is this unique mix of integrated courses in minerals, geophysics, geotechnical and environmental assessment that gives you a well-rounded and comprehensive skill set valued by employers.

As an Earth Resources Technician, you can expect to be in demand. Graduates of the ERT program pursue a variety of careers in applied geology and have one of the highest post-graduation employment rates in their field of study of any Fleming College program. Career opportunities include soil and rock analysis, land use management, groundwater assessment, mineral exploration, cleaning up contaminated sites, and other site investigations. You will learn how to win co-op work opportunities and will complete a six-month paid Co-op work term in an applied geology role. Our co-op students gain confidence in their abilities during their work term, and often secure full-time employment with their co-op employers. You will also study computing, sampling and safety planning, and communications - essentials for any earth resources professional and very important for the future developments in your career. Should you choose to continue your studies after graduation, we have several options. For more information please see the University Transfer Agreements at the end of this document.

WHY CHOOSE FLEMING

• Fleming College has been offering geology programs for over 30 years and has acquired a well-established reputation
• If you wish to continue studies at University there are two fast track options that can lead to Professional Geoscientist Status; Acadia University, Nova Scotia in Geology, and Trent University, Ontario, in Environmental Geoscience, both of which offer the opportunity to complete your B.Sc. degree with a further two years of study
• This program is extremely well supported by alumni - who donate equipment, samples, AND help new grads find meaningful work in the field - or hire them
• Many of your faculty have worked as geologists or in a related field - and share their experience and expertise enthusiastically with their students
• You have the opportunity to do significant experiential learning right here on campus - including soil, water and core testing

The Ecosystem Management Technology program builds on the expertise developed from the two year Technician program. You will also gain applied experience while working with community and resource agencies that are dedicated to long term ecosystem health.

PROGRAM HIGHLIGHTS
The third year of Fleming's Ecosystem Management Technology program begins with a mandatory four-day field camp in a remote wilderness setting. This experience offers both personal challenge and the opportunity to build effective working relationships with your classmates - essential preparation for the year ahead.

If you are looking for a challenge, are passionate about the environment and want to be a leader, then this program is for you.
Students participate in the unique placement program - Credit for Product - spending one day per week working with a team on a project for an external agency.
Students in the Ecosystem Management Technology program also host an annual EcoHealth conference. The class invites the public, local area residents, community groups and businesses to attend, participate and learn.
If you are interested in continuing your education once you complete the Ecosystem Management Technology program, the university transfer agreements in place with a number of universities are first rate. Alternatively, if you are a university student looking for a program to complement your degree and provide you with a more applied approach to learning, then this program will meet your needs.
Students will attend the Annual National Council for Science and the Environment Conference in Washington D.C. A current passport for this activity is required.

WHY CHOOSE FLEMING

• The Ecosystem Management Technologist program is the only one of its kind at an Ontario community college.
• As a discipline, Ecosystem Management is on the leading edge of resource conservation in the 21st century - the future is now.
• The School of Environmental and Natural Resources Sciences at the Frost Campus encourages small class sizes and access to state-of-the-art technology.
• Dedicated, award-winning faculty provide a challenging and dynamic learning environment in the heart of the Kawartha Lakes region.
• Our transfer agreements with universities enable graduates to further their studies and obtain a degree.
• Program graduates are eligible to apply for a Bachelor of Environmental Science degree at Trent or York University and complete it with an additional two years of study at these partner institutions (this would normally take seven years to complete instead of five).
• An agreement with Cape Breton University enables program graduates to obtain their Bachelor of Science (Environment) with approximately one year of study.

Are you motivated to contribute to a more sustainable future? Add a valuable skill set in planning to your degree or advanced diploma. Environmental planning focuses on sustainability in development projects for urban and regional land use.

PROGRAM HIGHLIGHTS
Land use, environmental planning, and integrated resource management are fields that are becoming increasingly complex, as population growth and urban and rural development threaten the natural environment and natural heritage systems. New provincial and municipal environmental protection legislation and guidelines to control this development require public input at all phases of the planning process, as well as knowledge of and adherence to these acts and policies.

With your background in environmental sciences, environmental studies, engineering, or a related science degree in biology, ecology, geography or sustainability, you can add this Ontario College Graduate Certificate in Applied Planning - Environmental. Gain a competitive advantage with this high demand, marketable skill set.

Throughout this intense, two-semester program you will obtain:

• Planning theory, practice, methods and ethics, with hands-on planning experience on real-world projects
• The ability to understand the implications of planning, relative to environmental sustainability, while balancing social and economic issues
• GIS applications skills and 3D computer applications for planning
• Planning skills for natural heritage, with a focus on Indigenous communities and perspectives
• Communications skills using planning language and concepts to participate in public meetings and presentations
• Knowledge of provincial environmental land use policies, acts, and associated municipal planning regulations and processes

Case studies will introduce you to the challenges found in this field, while practical projects enable you to apply your new skills and explore solutions.

Our School of Environmental and Natural Resource Sciences is highly respected for applied training in the environmental sector, GIS expertise and training, experience with natural heritage projects, and strong partnerships, including work with Indigenous communities. The Applied Planning - Environmental program will benefit from these synergies. As a student, you will benefit too from our network of contacts and strong reputation, both during the program, and upon graduation when it comes to your job search.

The two-semester Blasting Techniques Ontario College Certificate is the only program of its kind in Canada. This is a highly practical, hands-on program, in a rapidly growing industry.

PROGRAM HIGHLIGHTS
Fascinated by the explosives industry? Do you like to work outdoors, and in challenging environments? If so, you may be interested in exploring a career as a blaster. With our well-developed connections with industry and our specialized resources and drilling compound, students get the hands-on training necessary for their career in blasting.

• Blasters fill blast holes with explosives and detonate them to dislodge coal, ore, rock, or aggregate, or to demolish structures.
• Blasters are employed by construction, mining, and drilling and blasting companies, as well as in the special effects industry.
• You will focus on three types of explosive cuts, and incorporate a wide range of skills in science, mathematics, and communications.
• Courses include explosives, blasthole drilling, blasting theory, blast design, geology, safety and accident prevention, and environmental issues.

You will spend much of your time in labs, field classes and field assignments, and refining your skills in our state-of-the-art drilling and blasting training centre.

WHY CHOOSE FLEMING

• Fleming's Blasting Techniques certificate has several advantages upon completion:
• You will have common core training as a Surface Miner as required by the Ministry of Labour to enter most blasting sites.
• Upon graduation, you will have the option of certifying with the International Society of Explosives Engineers (ISEE) in Quarrying, Basic Construction Blasting, and the Fundamentals of Blasting (Level One).
• Another option upon graduation is to expand your career and job opportunities by continuing at Fleming College in the Resources Drilling Technician diploma program, with direct entry into the program's second semester (subject to availability).