Certificate in Electrical Techniques

at George Brown College - Casa Loma Campus Canada

Overview

The program covers installation, testing, maintenance, analysis and troubleshooting of specified electrical circuits, equipment and systems under the supervision of a qualified person. Throughout the program, students will learn to apply health and safety standards to their work, and perform tasks in accordance with the standards of the Canadian Electrical Code.

Program Learning Outcomes
The graduate has reliably demonstrated the ability to:

  • Assist in the interpretation and preparation of electrical drawings including other related documents and graphics.
  • Analyze and solve simple technical problems related to basic electrical systems by applying mathematics and science principles.
  • Use and maintain test and instrumentation equipment.
  • Assemble basic electrical circuits and equipment to fulfill requirements and specifications under the supervision of a qualified person.
  • Assist in the installation and troubleshooting of basic electrical machines and associated control systems under the supervision of a qualified person.
  • Assist in testing and troubleshooting electrical and electronic circuits, equipment, and systems by using established procedures under the supervision of a qualified person.
  • Assist in the troubleshooting of control systems under the supervision of a qualified person.
  • Use computer skills and tools to solve basic electrical related problems.
  • Assist in conducting quality assurance procedures under the supervision of a qualified person.
  • Assist in the preparation and maintenance of records and documentation systems.
  • Install and assist in testing telecommunication systems under the supervision of a qualified person.
  • Apply health and safety standards and best practices to workplaces.
  • Perform tasks in accordance with relevant legislation, policies, procedures, standards, regulations, and ethical principles.
  • Apply basic electrical cabling requirements and install and test system grounding for a specified number of applications under the supervision of a qualified person.
  • Identify problems and troubleshoot electrical systems under the supervision of a qualified person.
  • Assist in the selection of electrical equipment, systems and components to fulfill the requirements and specifications under the supervision of a qualified person.
Read More

30

Application Processing Days

Under Graduate

Program Level

Fact & Figures

Full Time On Campus

Study Mode

12

Duration

George Brown College - Casa Loma Campus

Location

Certificate in Electrical Techniques Assistant Fee

$15190

Tuition Fee

$12000

Average Cost of Living

$95

Application Fee

Certificate in Electrical Techniques Admissions Requirements

  • Minimum Level of Education Required: To be accepted into this program, applicants must have Grade 12 / High School Diploma or equivalent including the following required course(s):
    • Grade 12 English (C or U)
    • Grade 11 Math (M or U) or Grade 12 (C or U)
plane

Get superfast admissions at top Certificate in Electrical Techniques institutes in 2024

Benefits of choosing

edmission

Admission’s guaranteed at Top institutes across the world.

Enjoy exclusive application fee waiver’s with Edmissions.

Unlimited FREE Counselling sessions with Edmission’s Experts

Get Tips from industry veterans to crack the IELTS exam in 1 week.

Assistance with scholarships, loans, forex, student accommodation and visa guidance.

Where would you like to study*

Work Permit Canada

Students who wish to work in Canada require a work permit to do so. A student in Canada can work part-time during the course of his studies and full-time during holidays and semester breaks and post the completion of their course/program.

Rules for getting a part-time work visa in Canada

You can also work part-time on campus at your university.

Work Permit

Duration

Your part-time work permit will be valid for as long as you have a valid study permit.

Working Hours

20 Hours/Week

As a full-time student, you can work for a maximum of 20 hours a week. However, you can work full- time during holidays and breaks.

Document Required to Work in Canada

List

To apply for a work permit, you will need a study permit that mentions that you are allowed to work part-time on campus.

Social Insurance Number

Study Permit

You will need a Social Insurance Number (SIN) to Service Canada. if you wish to work in Canada during the course of your studies. To apply for the same, you need a valid study permit, and you should be a full- time student at a recognized university.

You can work part-time off-campus if you are studying in the Quebec province.

Duration of Work Permit Canada

Your part-time work permit will be valid for as long as you have a valid study permit.

Work Hours Canada

As a full-time student, you can work for a maximum of 20 hours a week. However, you can work full- time during holidays and breaks.

Document Required to Work in Canada

To apply for a work permit, you will need a study permit that mentions that you are allowed to work part-time on campus.

Social Insurance Number

You will need a Social Insurance Number (SIN) to Service Canada if you wish to work in Canada during the course of your studies. To apply for the same, you need a valid study permit, and you should be a full- time student at a recognized university.

Working after completing your course

In Canada, you will need a work permit to get a full-time job in Canada after finishing your studies. You chose a work permit like the Post-Graduation Work Permit (PGWP) if you wish to stay back in Canada and work full-time.

Visit Government of Canada Website for more detail

Post-Graduation Work Permit (PGWP)

The Post- Graduation Work Permit (PGWP) allows you to work for three years in Canada if you have completed a two years degree or more.

Application

how can i apply

You can either apply online or download the form and mail the application along with the required documents. Pay your fee and then wait for the decision to come.

Application Documents Required

List

To apply for the work visa, you need a degree from a recognized and accredited Canadian University along with an intention to stay and work in Canada only temporarily.

When to Apply?

One can apply for the full-time work permit in the first three months post the completion of their course during which the study permit is still valid.

How long does it take?

90 days

You will have to wait for 90 days for the decision on your work permit.

Duration

3 Years

The work permit is valid for 3 years if you have completed a two years degree program or more.

Fees

CAD 255

The fee for the work permit is CAD 255 plus the holder fee and the work permit processing fee.

Monthly Wages

CAD 1,600

An applicant is guaranteed a minimum salary of CAD 1,600 per month while working in Canada. This amount though varies on the job and the province you are working in.

Work Hours Canada

No Limit

There is no maximum limit, and you can work for as many hours as you want on the full-time work permit.

Required Documents

List

To apply for the work visa, you will need the following documents:

  • Forms: IMM 5710, IMM 5476 and IMM 5475;
  • Graduation Proof
  • Proof of payment of work permit fees
  • Copies of your travel and identification documents, passport pages and current immigration document.

Till a decision is made on your work visa, you can continue to work full time. All you need to have is your completed degree, should have applied for the permit before the expiry of your study permit and you should be allowed to work off-campus.

Information

Disclaimer

The information provided about the work permit is true and complete to the best of our knowledge. All recommendations are made without any guarantee on the part of the author or the publisher. The author and the publisher, therefore, disclaim any liability in connection to and with the use of this information.

Detailed Program and Facts

30

Application Processing Days

Full Time On Campus

Program Intensity

Under Graduate

Program Level

12

Duration

Study Visa

Student Visa For Canada

Any student who wishes to study in Canada requires a student visa. Some of the essential information for the application process is given below.

When Should I Apply?

4 to 6 months

Ideally, one should apply for the study permit at least 4 to 6 months before the commencement of your course/program.

Bank Account

No Need!

There is no need for a blocked bank account to apply for a student visa to Canada.

Duration of visa

Course Duration + 3 Months

The student visa is valid for the entire period of your course plus three months.

Time to Wait for Visa

35 Days

It takes time. It might take up to 35 days post your interview for the application process to complete and for you to finally receive your visa.

Appointment

Required

It varies from applicant to applicant, but one may have to take part in one or two visa appointments, namely a medical examination and a visa interview.

How you can apply

Application Process

An applicant can either apply online or offline by visiting a visa application centre and submitting their documents. After the analysis of your application, you might be called for an interview.

Fee

Visa Fee

The visa application fee for Canada is CAD 150.

Minimum Funds

833 CAD, 917 CAD

You require a minimum monthly amount to be deposited into your account to prove that you can sustain yourself while studying in Canada. If you are studying in Quebec, you need to have a monthly minimum of CAD 917, and if you are studying in a province except for Quebec, you need to have a minimum of CAD 833 per month.

Any other expenses

Required

You will have to pay a medical examination fee and a visa application service fee to the tune of CAD 15 if you visit a visa application centre to apply for your visa.

Medical Examination

Required

One has to undergo a series of medical examinations to be deemed fit for a student visa of Canada. The tests mostly include blood and urine tests, chest x-rays and other organ checkups.

Language Skills

Not Required

one doesn’t need to prove their language skills in applying for a Canadian Visa.

Disclaimer: The information provided about the work permit is true and complete to the best of our knowledge. All recommendations are made without any guarantee on the part of the author or the publisher. The author and the publisher, therefore, disclaim any liability in connection to and with the use of this information.

English Test Requirement

6.0

Minimum Overall Score

80.0

Minimum Overall Score

54.0

Minimum Overall Score

Other Courses by George Brown College - Casa Loma Campus,Canada

The Honours Bachelor of Technology (Construction Management) program provides a dynamic curriculum that integrates theory, applied research, field study and hands-on practical education. Recognizing that today’s successful construction manager must possess both technical and managerial competencies, the curriculum combines studies in construction science and technology with studies in business and management methods as applied to construction.

Students obtain the knowledge and skills to manage the functions and processes of construction projects from start to finish. They master construction-related technical disciplines and soft skills that are critical to completing projects on time and within budget. Graduates of this program are entitled to the academic credential designation of Hons. B.Tech. (Construction Management).

The Honours Bachelor of Technology (Construction Management) program is well recognized by the construction industry and is fully accredited by the Canadian Institute of Quantity Surveyors (CIQS), the Chartered Institute of Building (CIOB), and the Royal Institution of Chartered Surveyors (RICS). Graduates of this program are qualified to obtain professional memberships in various construction management associations. Professional memberships are based on the candidate’s education, training, and work experience.

With the completion of this degree program, graduates will have satisfied all academic requirements for professional membership of the Chartered Institute of Building (CIOB), the Canadian Institute of Quantity Surveyors (CIQS), and the Royal Institution of Chartered Surveyors (RICS). Memberships in these associations must be applied for separately.

Graduates also qualify to obtain their Gold Seal Certification (GSC) offered by the Canadian Construction Association (CCA) to become certified Superintendents, Estimators, Project Managers, Construction Managers, and Construction Safety Coordinators.

Your Field Education Options
WORK TERM

An integral component of the Honours Bachelor of Technology (Construction Management) degree program is a mandatory field study or Work Term offered in the Spring/Summer of the third year of the program. The Work Term is jointly facilitated through the Angelo DelZotto School of Construction Management and the Centre for Construction and Engineering Technologies (CCET)’s Industry Liaison Office (ILO).

Prior to the Work Term, students participate in job preparation courses that cover areas such as workplace communication practices, resume writing, job search strategies and interview practice to enable them to communicate clearly and effectively. In the field settings, students practice team-building, managing, and tracking project resources, analyzing project performance, preparing technical proposals and reports, and improving their construction project management skills.

Students are required to complete a minimum of 14 weeks of full-time work experience, or part-time equivalent of no less than 420 hours of verifiable work experience, in the field of construction management in order to fulfill the Work Term requirement.

Students are allowed to complete the Work Term requirement through the following pathways:

Field Placement: Students register in the Work Term course (TCOP 1001), secure field placement in a relevant construction field, obtain a minimum of 14 weeks of full-time fieldwork experience, or part-time equivalent of no less than 420 hours of relevant fieldwork experience, and pass the course.

Prior Learning Assessment Recognition (PLAR): Students who have prior work experience equivalent to the minimum requirement (that is, minimum of 14 weeks of full-time or part-time equivalent of no less than 420 hours of relevant work) can seek to complete the Work Term requirement of the program through the PLAR process

WORK/STUDY ABROAD OPPORTUNITIES

There is also a work/study abroad opportunity that will allow a limited number of students to complete one month of field studies at Shanghai Urban Construction College (SUCC) in China, including two weeks of studies and two weeks of work. SUCC is a multi-divisional college that serves 6,000 students with over 400 faculty members.

Program Learning Outcomes

  • The graduate has reliably demonstrated the ability to:
    • Use relevant media to communicate all manner of information related to a construction project.
    • Analyze the past performance of construction projects to predict and improve the execution of future projects.
    • Manage construction projects in a compliant, safe, ethical and sustainable manner.
    • Apply management tools and techniques to execute construction projects on time and within budget.
    • Recognize and value the diversity of opinions, processes, and approaches in executing construction projects.
    • Incorporate effective leadership strategies to develop high-functioning, multidisciplinary and multicultural teams and work groups.
    • Apply the principles and practices of leadership development and human resources to manage and develop people in the construction industry.
    • Analyze technical problems encountered in construction projects and develop appropriate solutions in accordance with the principles and practices of construction science and management.
    • Apply business, accounting and financial principles and practices to effectively manage construction project costs.
    • Apply the principles and practices of construction management in assessing the key performance indicators of construction projects.
    • Evaluate potential risks impacting construction projects and devise appropriate risk mitigation strategies.
    • Create technical documents relevant to the design, procurement and execution of construction projects and manage documentation flow effectively.
    • Behave in a fair, ethical and responsible manner consistent with professional codes of conduct, laws, policies and contracts.

48 month

Duration

$ 18190

Tuition

Employment opportunities in the Welding trade span several industries including transportation, petro chemical, oil and gas, aerospace, fabrication, manufacturing, pipelines, mining and construction.

George Brown’s Welding Techniques program prepares students with practical, hands-on experience that applies the technical theory and elements of the welding field. Students articulate their technical and essential employability skills through an e-portfolio, based on skill development throughout the program.

At the end of this intense, two-semester program, students will have the opportunity to challenge the shielded metal arc weld test, in accordance with CSA W47.1/W59 standards, in a position(s) of their choosing through the Canadian Welders Bureau. (This test will be voluntary and at an extra cost to the student.)

This experiential program will provide you the skills to master five of the most common types of welding processes:

  • Shielded Metal Arc Welding (SMAW): This process uses a consumable electrode covered with flux. It is the primary type of welding used in the maintenance and repair industry. Arc welding is usually used to weld iron and steel, although it can also be used for alloys (aluminum, nickel, etc.).
  • Gas Metal Arc Welding (GMAW): This welding process uses electricity to melt and join pieces of metal together. It is generally regarded as one of the easiest types of welding to learn. It is also called Gas Metal Arc Welding (GMAW). It can be used to weld a variety of metals such as carbon steel, stainless steel, aluminum, magnesium, copper, bronze, etc.
  • Gas Tungsten Arc Welding (GTAW): The process uses a non-consumable tungsten electrode that delivers the current to the welding arc. The tungsten and weld puddle are protected and cooled with an inert gas, typically argon or helium. It is most commonly used for welding stainless steel and non-ferrous metals like aluminum, magnesium and copper alloys.
  • Plasma Arc and Oxyfuel Cutting: This process utilizes an electrode and compressed gas, forced at high speeds through a nozzle, usually copper, to cut metal, primarily mild steel, stainless steel and aluminum. Oxyfuel cutting uses fuel gases combined with oxygen to cut metals, usually steel.
  • Fabrication: Metal fabrication is the building of metal structures by cutting, bending, and assembling processes. It is a value added process that involves the construction of machines and structures from various raw materials.

Program Learning Outcomes

  • The graduate has reliably demonstrated the ability to:
    • Perform work responsibly and in compliance with the Occupational Health and Safety Act and industry processes and procedures, including demonstrating learned knowledge of WHMIS.
    • Interpret engineering drawings and blueprints to produce basic graphics and welding projects as required by industry.
    • Select, plan, and demonstrate sustainable metal fabrication operations using industrial metal fabrication machinery and emerging technologies.
    • Perform basic technical measurements and welding functions accurately, using appropriate equipment and welding techniques.
    • Create welds on various types of materials and joints in the major welding positions to industrial standards and codes.
    • Use shop tools and equipment to manufacture, assemble, maintain and repair components according to required specifications and industry standards.
    • Interact effectively and professionally in shop environments, both independently and with fellow workers and other tradespeople.
    • Assess weld quality and implement corrective action where required to follow quality control and quality assurance procedures and meet organizational standards and requirements.
    • Create a professional development plan that addresses one’s strengths and areas for growth in the greater context of the welder profession.

12 month

Duration

$ 15190

Tuition

Building automation systems don't just control the basics: they regulate airflow, monitor energy use and are integrated with security, lighting and other building systems to deliver comfort, safety and energy efficiency. Today’s buildings are increasingly complex, and they differ in use and size, but also in operating hours, comfort levels and environmental conditions. Offices, residences, hotels, schools and administrative buildings all have different requirements. Optimal building services technology is the result of appropriate systems design and integration during planning, construction, commissioning and operation.

This advanced diploma program in Building Automation provides students the technical skills they need for success in the job market. Students learn to:

  • Install, program, adjust and maintain building automation systems
  • Program and install sensors, actuators and controllers
  • Collect data for use in real-time or for archiving in a central server
  • Work with building software platforms that interconnect different systems

Graduates will have a diverse set of skills and abilities that will also prepare them for "green" careers focused on energy efficiency, renewable energy and the environment. This program provides a skill set that is in high demand in both the construction industry and the controls and automation industry.

Industry Skills

  • Safety practices in the installation and troubleshooting of HVAC/R systems, including applicable codes and standards of the NEC, ASHRAE, OSHA, EPA and other regulatory bodies.
  • Basic HVAC/R processes and the function, layout and operation of commercial HVAC/R systems.
  • Functions, operating characteristics and applications of the control loops and control modes in digital, analog and pneumatic commercial control systems.
  • Blueprints and manufacturer’s technical instructions for installing or servicing a sensor, controller, actuator and related relays and power supplies.
  • General-purpose software and specific building automation software that monitors and controls HVAC/R and electrical systems.
  • Various BAS controls and systems, including DCS, PLC, PAC and SCADA.
  • Functions of network devices and protocols, such as a bridge, router, gateway, hub, firewall, twisted pair, Ethernet, TCP/IP, Zigbee, WiFi, BAS/IP and BacNet.
  • Emerging green technologies, such as solar, wind and hydronic, and how they can be integrated into building systems and residential applications.

Program Learning Outcomes
The graduate has reliably demonstrated the ability to:

  • Fabricate and build electrical, electronic, and mechanical components and assemblies in accordance with operating standards, job requirements, and specifications.
  • Analyze, interpret, and produce electrical, electronic, and mechanical drawings and other related technical documents and graphics necessary for electromechanical design in compliance with industry standards.
  • Select and use a variety of troubleshooting techniques and equipment to assess, modify, maintain, and repair electromechanical circuits, equipment, processes, systems, and subsystems.
  • Modify, maintain, and repair electrical, electronic, and mechanical components, equipment, and systems to ensure that they function according to specifications and to optimize production.
  • Design and analyze mechanical components, processes, and systems by applying engineering principles and practices.
  • Design, analyze, build, select, commission, integrate, and troubleshoot a variety of industrial motor controls and data acquisition devices and systems, digital circuits, passive AC and DC circuits, active circuits and microprocessor-based systems.
  • Install and troubleshoot computer hardware and programming to support the electromechanical engineering environment.
  • Analyze, program, install, integrate, troubleshoot and diagnose automated systems including robotic systems.
  • Establish and maintain inventory, records, and documentation systems to meet organizational and industry standards and requirements.
  • Select and purchase electromechanical equipment, components, and systems that fulfill job requirements and functional specifications.
  • Specify, coordinate, and apply quality-control and quality-assurance programs and procedures to meet organizational standards and requirements.
  • Work in compliance with relevant industry standards, laws and regulations, codes, policies, and procedures.
  • Develop strategies for ongoing personal and professional development to enhance work performance and to remain current in the field and responsive to emergent technologies and national and international standards.
  • Contribute as an individual and a member of an electromechanical engineering team to the effective completion of tasks and projects.
  • Design and analyze electromechanical systems by interpreting fluid mechanics and the attributes and dynamics of fluid flow used in hydraulic and fluid power systems
  • Contribute to project management through planning, implementation and evaluation of projects, and monitoring of resources, timelines, and expenditures as required.

36 month

Duration

$ 15190

Tuition

This three-semester graduate certificate program provides applied education for construction management positions in the construction sector. Candidates will receive graduate-level training that builds on their internationally acquired education and experience to enable them to successfully enter the Canadian construction workforce.

Program Learning Outcomes
The graduate demonstrates the ability to:

  • Develop and use strategies to promote continuous professional learning in the construction industry.
  • Monitor and support workplace health and safety practices and procedures that are compliant with current legislation and regulations.
  • Assess construction project operations for compliance with contractual obligations, applicable laws, standards, bylaws, codes and ethical practices in the construction industry.
  • Analyze and monitor construction processes to ensure that sustainability practices are implemented in accordance with contract documents, industry standards and environmental legislative requirements.
  • Establish and manage relationships among diverse project stakeholders to achieve construction project goals.
  • Manage the production, storage, retrieval and communication of project-related digital documents according to best practices, to meet construction project deadlines and goals.
  • Perform a feasibility study to inform decisions in the planning phase of a construction project.
  • Schedule, manage and evaluate the progression of construction projects by applying the principles, practices and tools of construction project management to complete projects on time and within budget.
  • Prepare estimates and manage procurement processes to control costs in accordance with best practices in construction project management.
  • Develop and oversee quality assurance and control processes involved in the completion of construction projects to meet project specifications and industry quality standards.
  • Analyze and manage project risks to mitigate their impact throughout the construction project lifecycle.
  • Formulate human resource management strategies to optimize personnel requirements for construction project completion.
  • Build and lead multidisciplinary teams throughout the construction project lifecycle to accomplish construction project goals.

12 month

Duration

$ 23220

Tuition

The Fashion Techniques and Design program prepares graduates for careers in garment manufacturing design rooms. This is a women's wear program that simulates, as closely as possible, the industry's standards, practices and facilities. You will use industrial machines and learn the essentials of technical illustration, pattern making, pattern grading and clothing construction. Additional core subjects include textiles, technical specifications and history of costume. Program electives allow you to select specific related subject areas, such as fashion show development, portfolio development, draping, lingerie, men's pattern drafting, leather apparel, knitwear and bridal and evening wear. Computer skills in Adobe Illustrator, pattern drafting and pattern grading are included as core and elective courses and are continually upgraded to meet industry needs. This program covers introductory methods to more advanced concepts in the second year.

An annual fashion show and portfolio event highlights successful student projects. Students have the opportunity to network with industry, participate in numerous competitions, work on applied research projects, volunteer and attend industry events.

Note: This program requires extensive sewing; manual dexterity and good vision are assets. Both sewing experience and access to a sewing machine outside of the campus facilities are expected.

At the School of Fashion and Jewellery, the learning environment is as diverse as our students and there are many extracurricular activities to take advantage of.

Program Learning Outcomes

  • The graduate has reliably demonstrated the ability to:
    • Draft and grade flat patterns for mass garment production.
    • Select and use production methods and techniques that best suit the fabric, pattern and design of the garments.
    • Select garment materials that are compatible with the overall apparel design and meet the user's needs.
    • Operate industrial sewing, pressing, grading and other technical equipment safely to professional standards.
    • Apply technical and computing skills to fashion design and production.
    • Research and analyze factors, trends, stylistic features, and art principles that influence current fashions.
    • Prepare visual and portfolio materials, product specifications, and cost analysis for a product, project and/or market.
    • Design, prototype and produce original patterns and garments using mass production industrial methods and equipment.

24 month

Duration

$ 15190

Tuition

Looking to transition careers or fill in the gaps to gain advanced blockchain development skills?

This unique Blockchain Development program at George Brown College in Toronto focuses on designing and implementing decentralized applications by leveraging blockchain technology. The three-semester program is designed to also thoroughly cover full stack development to give potential students all the tools they need to succeed in this emerging and exciting field.

This program has been developed with the support of blockchain industry professionals and is taught in a full-time executive format of approximately 20 hours per week of study over a 26-week time period. Co-op and work integrated learning opportunities are available during the third semester of the program. It is the first certificate in blockchain offered by a Canadian college.

The skills you’ll learn include:

  • Smart contracts
  • Design patterns for blockchain
  • Distributed applications (dApps)
  • Full stack development
  • Blockchain architecture, security practices, laws and regulations, and more

Your Field Education Options
During the third semester of the program, students may choose whether to apply for a Co-op position or take a Work Integrated Learning course which includes an industry-sponsored project.

To be eligible for co-op, a student must complete all Semester 1 and Semester 2 courses. As well, an overall GPA of 3.0 must be achieved.

Program Learning Outcomes

  • The graduate has reliably demonstrated the ability to:
    • Communicate essential concepts related to blockchain technology and its industry applications.
    • Implement best security practices for blockchain solutions.
    • Design cryptoeconomic models to solve business problems.
    • Design the architecture of decentralized applications and systems.
    • Develop decentralized applications leveraging blockchain technology.
    • Explain the legal implications, regulations, and industry standards that are relevant to blockchain technology.
    • Apply IT project management principles and best practices.
    • Contribute to the field and blockchain community through various open source projects, partnerships, and community involvement.

12 month

Duration

$ 23220

Tuition

Creative Arts & Design

Diploma in Jewellery Methods

The Jewellery Methods program provides you with the skills and abilities necessary to succeed in this demanding profession as a goldsmith/bench jeweller. The essential skills of measuring, sawing, filing, soldering and finishing are stressed early in the program. These skills are built upon through the introduction and practice of many traditional and contemporary techniques. Once essential skills are achieved, you study more advanced goldsmithing techniques, jewellery repair, gemsetting and model making, as well as jewellery elective subjects.

Jewellery history, technical drawing, gemmology and an overview of the industry are included to provide you with a broad knowledge of the jewellery field.

Program Learning Outcomes

  • The graduate has reliably demonstrated the ability to:
  • Create jewellery items in copper, brass, silver and gold, using fundamental goldsmithing skills for entry-level employment in the jewellery industry.
  • Create wax models using hand-carving techniques.
  • Set gemstones in simple settings to industry standards.
  • Repair jewellery to industry standards and to meet customer satisfaction.
  • Produce multiple reproductions of jewellery using the lost wax casting process.
  • Incorporate polishing techniques to produce market ready jewellery items.
  • Differentiate gemstones and their properties as required in the jewellery industry.
  • Contextualize jewellery according to historical and stylistic qualities to assess provenance, materials and method of production.
  • Use technical drawing techniques to communicate jewellery designs as required.
  • Follow ethic, security and business practices consistent with jewellery industry standards.
  • Employ jewellery tools, equipment and materials in a confident and safe manner.
  • Use computer software (CAD) skills to produce 2D drawings and 3D models of complex jewellery forms.
  • Produce a professional portfolio that documents attained skills for employment applications.
  • Construct finished jewellery pieces according to given designs.

24 month

Duration

$ 14600

Tuition

Wireless communications are pervasive in our lives. They have grown in recent years to include everything from personal communications networks to governments, hospitals and neighbourhood businesses. And there’s no end in sight to the growth of our wireless world.

George Brown College’s leading-edge Wireless Networking postgraduate program is designed to put you at the centre of this exciting world by giving you high-demand skills in radio frequency (RF), cellular, broadband and advanced data communications.

We offer you a unique choice of career direction. You can specialize in:

  • Long Term Evolution (LTE) and Broadband Technologies
  • Advanced Network Security
  • Voice over Internet Protocol (VoIP) Technologies

Program Learning Outcomes
The graduate has reliably demonstrated the ability to:

  • Test and measure RF (radio frequency) signals, attenuation and antenna systems.
  • Assist with the preparation and execution of wireless site surveys.
  • Build a wired and/or wireless computer network using system design documentation.
  • Measure performance of both wired and wireless network components and applications using a variety of basic and advanced network management tools.
  • Produce documentation and reports related to network components and applications performance.
  • Troubleshoot and resolve technical problems related to both wired and wireless networks using standardized approaches and methodologies.
  • Install and upgrade network hardware (e.g. workstations, servers, wireless access points, routers, switches, firewalls) and related components and software according to best practices in the industry.
  • Monitor and evaluate network security issues and perform basic security audits on both wired and wireless networks.
  • Assist in the collection and analysis of user requirements related to wired and wireless networks.
  • Utilize change control, issue documentation and problem escalation procedures and processes as per industry best practices.
  • Generate and maintain “as built” network documentation following industry best practices.
  • Compare network performance against service levels and assist in the development of action plans as required against service level agreements.
  • Employ concepts and practices as defined in ITIL (IT Infrastructure Library) to manage IT services and operation, including project management tools and techniques.

12 month

Duration

$ 23220

Tuition

As we advance further into this increasingly digital world, Artificial Intelligence and Data Science will revolutionize most industries by optimizing business processes and automating decision-making in many white-collar jobs. The Applied A.I. Solutions Development program will instill graduates with the skills needed to provide existing businesses and emerging startups with the tools required to thrive in the digital revolution.

This three-semester graduate certificate program uses a hands-on, applied approach to the field of A.I., giving students the broad range of skills needed to excel in this rapidly growing industry.

It teaches the development and application of Machine Learning/Deep Learning models and provides a fundamental understanding of the underlying mathematical algorithms that power them. This combination of knowledge and skills will allow graduates to identify and select appropriate algorithms for a given use, build and fine-tune models, and visualize and effectively communicate the resulting data, thereby bridging the traditional roles of Data Scientist, Machine Learning Engineer and Business Translator.

Your Field Education Options

  • To be eligible for co-op, a student must complete all Semester 1 and Semester 2 courses. As well, an overall GPA of 3.0 must be achieved.
  • During the third semester of the program, students may choose whether to apply for a Co-op position or take a Work Integrated Learning course that includes an industry-sponsored project.

Program Learning Outcomes

  • The graduate has reliably demonstrated the ability to:
    • Identify, evaluate and manage relevant data sources to support data analytics and to meet organizational needs.
    • Recommend different systems, architectures and data storage technologies to support data-driven solutions.
    • Develop and deploy complete Machine Learning/Deep Learning production systems for a variety of industry use cases that meet the needs of a specific operational/business process.
    • Assess and apply appropriate mathematical models, algorithms, tools and frameworks to develop A.I.-enabled, industry-specific solutions.
    • Design and present A.I. solutions effectively to stakeholders through the use of data visualizations.
    • Apply legal, ethical, privacy and security-related standards and considerations in data science projects in a manner that protects privacy and confidentiality, addresses data bias and transparency, and ensures data integrity.
    • Implement artificial intelligence systems on time and budget using best practices and strategies in design thinking, project management and lifecycle management.
    • Design artificial intelligence (A.I.) systems through the application of systematic approaches and methodologies to meet growing organizational needs.

12 month

Duration

$ 23220

Tuition

This intensive 12-month Commercial Dance program provides you with the performance skills and marketability necessary to work in the vast field of commercial dance. A graduate has the ability to dance, sing and act, enabling a performance career in music videos, musical theatre, cruise ship performance and more.

Dance training is in jazz, hip hop and ballet combined with in-depth acting, vocals and chorus repertoire. Career management and personal marketing skills combined with polished performance technique will launch your professional commercial dance career.

STUDENT SELECTION
Entrance requirement is dance training at the intermediate jazz level with training in additional dance forms as a significant asset. Prospective students must pass an audition in jazz as well as an interview.

To learn more about the audition process, visit georgebrown.ca/performingarts/danceauditions.

Program Learning Outcomes

  • The graduate has reliably demonstrated the ability to:
    • Perform jazz and hip hop dance technique to professional standard in choreographed solo and ensemble productions.
    • Perform chorus repertoire technique, memorizing and reproducing long movement sequences integrated with vocals, to professional standard in commercial ensemble productions.
    • Sing at a professional standard using pulse, rhythm, meter, dynamics and accurate pitch in solo and ensemble presentations.
    • Create and perform artistically expressive dramatic characterizations in a dance context at a professional level for solo and ensemble productions.
    • Present self professionally at auditions and in industry environments through resumes, biographical backgrounds, and photographs during commercial and academic interviews.
    • Develop self-knowledge and reflective practice to make informed artistic, pedagogical, personal development and career choices within the performing arts industry.
    • Exercise critical thinking skills to peer evaluate performance, mentor creativity and innovate to inspire projects, peers and students.

12 month

Duration

$ 15190

Tuition

View All Courses by George Brown College - Casa Loma Campus, Canada

Top Study Abroad Exams

GRE Exam

The Graduate Record Exam (GRE) is a necessary and popular enteryway exam that learners must pass in order to be acc.. Red More

GMAT Exam

The Graduate Management Admission Test (GMAT) is a well-know evaluation for being accepted into MBA programs. Per... Read More

SAT Exam

The SAT is a Standardized evaluation that is necessary for enrolling in underaduate cur... Read More

Popular Universities to Study Abroad

Study in Canada
Study in USA
Study in UK
Study in NZ
Study in India
Study in UAE

Explore Colleges and Courses in Canada

Popular States
Popular Cities
Popular Streams

Latest Blog Posts

Trending Blog Posts

edmission

Search, Shortlist, Apply and get accepted! It’s that Simple to pursue your dream to Study abroad with Edmissions. Our team of experts provide you the right guidance that helps you to take admission in your dream college in countries like Canada, the USA, the UK

© 2021-2024 Edmissions - All rights reserved.

TALK TO OUR EXPERTS

whatsapp