Bachelor of Business Administration - Entrepreneurship & Innovation Concentration

at Northern Alberta Institute of Technology (NAIT) Canada

Technology like computers, robots, lasers, fibre optics, artificial intelligence and satellite communications all use microelectronic technology.

In this program, you will gain the ability to solve technical and scientific problems with these and other technologies, while learning principles of electricity, embedded systems, communications, industrial electronics and problem solving skills. You'll also learn fault and failure isolation (troubleshooting) skills that are applicable to the immediate needs of employers.

The program emphasizes practical skills and state-of-the-art applications to ensure immediate applicability to the needs of industry.

Hands-on, industry relevant skills:-
Through an emphasis on practical skills that you can take straight to industry, the Electronics Engineering Technology will help you gain a comprehensive understanding of the principles of electricity, microcontrollers, communications, control systems and industrial electronics. You'll be given the opportunity to design and develop complex electronic systems and find solutions to real-world problems. 

Collect, distribute, treat and manage our most valuable resource
Freshwater is the planet's most important resource. It's necessary to sustain life, cultivate food and generate power. Although 70% of the Earth's surface is covered by water, less than 1% of it is freshwater. This natural scarcity, coupled with an increasingly environmentally-conscious society, has created a strong demand for highly skilled, well-trained professionals in the field of water management.
The NAIT Water and Wastewater Technician program – the only such program in Alberta – is designed to provide you with the important skills necessary for a rewarding career in this growing industry.

Hands-on, industry-relevant skills
In this program, you'll be instructed in the fields of water treatment, water distribution, wastewater collection and wastewater treatment. You'll experience a combination of traditional classroom delivery, self-study and tutor-supported activities.
Hands-on training in labs will help you develop the skills to maintain and operate mechanical equipment, treat water and enter the workforce prepared and ready to go.

By the time you graduate, you'll have a better understanding of:

• Basic chemistry, math and electricity
• Water and wastewater treatment processes
• The operation and maintenance of water distribution and wastewater collection systems
• Hydraulics
• Blueprint reading

The focus of this program is the accommodation and food and beverage segments of the hospitality industry. Students gain business and customer service skills in food and beverage service techniques, front desk check-in procedures, financial accounting, economics and written communications. The Hospitality Management program is a two-year course of study which provides students with the skill sets and abilities required to work in the hospitality industry. The program focuses on service skills for food and beverage, catering and front-desk operations with specific courses in hospitality law. The second year examines marketing, financial management, supervisory skills and advanced courses in hotel, restaurant and catering operations. A 400-hour work experience term is also included.

The program is also built around traditional business subjects such as business communications, accounting and organizational behaviour. Courses are delivered through lab and lecture formats beginning with supervisory skill development and progressing toward more complex management functions. The Hospitality Management program provides training and skill development in:

• business communications
• food and beverage service
• banquets and catering service
• operations management
• front-desk principles and procedures
• hospitality law
• supervisory principles and procedures
• organizational behaviour
• computer applications
• introduction to marketing
• introduction to accounting
• general tourism knowledge

Graduates of the Hospitality Management program may find employment in a variety of sectors and positions within the tourism industry, as:

• food and beverage servers
• food and beverage supervisors
• food and beverage managers
• banquet and catering supervisors
• front-desk supervisors
• front-desk managers
• front-desk agents
• night auditors
• reservations agents
• entrepreneurs
• consultants

The Digital Media and IT (DMIT) program is multi-disciplinary in its approach. Spanning a range of career opportunities from business analyst to visual designer, this innovative program allows you the ability to meet industry demand while developing skills aligned with your individual talents and inclinations.

The Digital Cinema area of emphasis gives you real world, hands-on experience that will allow you to not only learn about filmmaking but also become a filmmaker and creative entrepreneur.

Hands-on, industry-relevant skills:-
DMIT - Digital Cinema courses prepare you for the creative, technical and business aspects of the rapidly growing digital cinema industry while also introducing you to industry organizations and professionals that can assist you in launching your career.

Our in-depth and industry-directed courses will help you identify original stories and teach you how to plan, script, budget, film and edit these stories to deliver finished narrative fiction and non-fiction productions. Through all four levels, you will be mentored by award-winning industry professionals.

For aspiring producers, content creators and technical craftspeople, the Digital Cinema area of emphasis is highly focused on the business side of digital screen production. You will have the opportunity to develop your own transmedia production while developing a business plan that includes financing, casting and all five phases of production.

The Combined Laboratory and X-Ray Technology program is unique in that students are trained in both the medical laboratory and x-ray disciplines, practicing predominantly in rural communities. On completion of their training, graduates are able to perform general medical laboratory procedures, general diagnostic radiographic procedures, and electrocardiograms. Students also receive training on information systems and technology in the medical laboratory and diagnostic imaging departments.

What You Will Learn
Hands-on, industry-relevant training
Students attend classes full-time at NAIT for a total of 2 years where they will learn and practice the skills required to be a registered CLXT.

Year 1 of the Combined Laboratory and X-Ray Technology program begins every September and consists of 38 weeks of lectures and hands-on labs that align with current industry standards. This includes two 15-week semesters, and one 8-week intersession located at the NAIT Main Campus.

Upon completion of year 1, the student progresses to an affiliated rural clinical site to complete 40 weeks of Work Integrated Learning (WIL). Students will train alongside technologists where they will apply the knowledge learned in year one and continue to develop their critical thinking and professionalism skills while providing high quality patient care. Scheduled shifts during clinical training will include evenings, nights and weekend days.

Individuals will work alone or alongside physicians, other technologists, nurses and non-medical personnel. The ability to work independently and/or closely with others are important requirements for an effective Combined Lab and X-Ray technologist.

Environmental Monitoring & Assessment students investigate the impact of human activities on air, water, soil and vegetation, and gain a solid foundation in environmental sampling, assessment and laboratory skills. Students learn how to monitor and assess environmental quality, apply principles of quality assurance/quality control, manage waste, and reclaim and remediate land. Graduates may conduct environmental site assessments, collect samples from surface and ground water, air, soil and waste, or analyze samples for pollutants in an environmental lab. They work with industry, consultants or government on land and water remediation and reclamation, and investigate environmental issues for various research groups.

Hands-on, industry-relevant skills
During the first semester, you'll acquire skills and knowledge in the general sciences of biology and chemistry, communications, ethics, botany, zoology, genetics, and lab techniques and calculations.

You'll then be trained in the following areas
Field Skills:

• Perform field analysis of soil, vegetation and water quality
• Monitor air pollutants
• Collect environmental samples from air, water, soil, plants and waste for further lab analysis
• Conduct environmental site assessments – ESA (Phase I - III)
• Maintain and calibrate field equipment for environmental sampling

Additional Skills:

• Design and manage group-based projects
• Measure effects of pollutants on the environment by studying toxicology
• Use current solid and hazardous waste treatment technologies and monitoring systems
• Use legislation and standards related to environmental issues
• Employ pollution prevention and pollution control technologies
• Use quality assurance and quality control (QA/QC) principles to obtain accurate data
• Generate and keep detailed log books
• Compile and manage data using MS Office
• Write reports, perform literature reviews, and prepare and give presentations

Accounting is the foundation for business, ensuring profitability and a source for strategic decisions. If you’re someone that enjoys detail-oriented, analytical work, this field will provide a challenging career.

In this program you’ll learn financial theory and develop technical expertise in accounting. In our hands-on classroom environment, we will teach manual accounting techniques as well as current software applications so you can stay competitive in an ever-in-demand industry. You’ll also benefit from managerial courses that will expand your knowledge and prepare you to work in supervisory positions.

Are you up for the challenge? Pursue a career that’s driven by data and critical to the success of business.

What You Will Learn
Hands-on, industry-relevant skills
In the first year of the program, all business students take the same 10 foundational courses in order to gain core business knowledge. In the second year of studies, you will take the required courses to get a specialized accounting diploma upon graduation. 

We foster skill development in personal and corporate taxation, external auditing and accounting information systems with an understanding of quantitative analysis techniques and creating connections to financial data.

Our accounting diploma program focuses on: 

• financial accounting
• internal and external auditing 
• data analysis 
• taxation 
• managerial accounting 
• budgeting 

You want to learn the skills and knowledge of conventional machining operations to utilize drill presses, lathes, milling machines and various grinding machines, including using Computer Numerical Control (CNC) programming, set up and operation. You will also receive introductory CAD/CAM training, as well as inspection and quality control training.
Successful completion of this 1-year certificate can allow you to challenge the first year apprenticeship exam for the Machinist program.

What You Will Learn
Hands-on, industry-relevant training

• Graduates of the Computer Numerical Control (CNC) Machinist certificate are responsible for manufacturing components for the oil and gas, mining, forestry, construction and transportation industries. A CNC machinist will demonstrate trade specific skills in programming, setup and operation of computer controlled tools. Graduates will also perform competently when working with manual machine tools.
• Machinists are able to work efficiently on their own and/or in team environments where problem-solving skills, critical thinking skills and current knowledge of technological trends and quality practices are essential to daily work. A graduate with a CNC Machinist certificate may be given the opportunity to apprentice in the machinist trade. This program has both fall and winter intakes.

Is this program for you?
To be successful as a machinist, you must have:

• Good hand-working skills
• Good problem-solving capabilities
• Mechanical inclination
• An ability to work well with others
• Competence in math
• Mature attitudes towards learning and work
• During the first semester of the CNC Machinist certificate, you will receive training on manual machines such as engine lathes, milling machines, drill presses and grinders.
• In the second semester, you will receive training on the operation, set up and programming of CNC (computer numerical control) turning and milling centres.
• The final component is an 8-week  work placement, which gives you an opportunity to apply your skills and knowledge in an industrial setting by working in a machine shop.

This nationally recognized program provides a wide range of training and will give you the skills necessary to make full or partial dentures, repair crowns, bridges and orthodontic appliances. You’ll learn the art and science of creating corrective devices for natural teeth and tissues.

A dental technologist is a master of their craft and an essential member of the dental-health team. To be successful, you’ll need to display meticulous attention to detail and an equal combination of technical skills and artistry.

What You Will Learn
Hands-on, industry-relevant training 
Throughout the program, you’ll recreate the appearance of natural teeth in fixed restorations such as crowns and implant restorations using porcelain, metal alloys and ceramic materials. For corrective devices like orthodontic appliances, you’ll learn the physical and biological forces of handling waxes, wires and acrylic materials.

You’ll have an individual workstation in the dental lab, complete with the latest industry-standard equipment, like:

• press ceramic furnace
• digital laboratory scanner
• acrylic injection system
• pressure thermal-forming machine

You can expect to spend, on average

• 32 hours per week attending classes over the course of a semester
• 10-15 hours per week studying and completing class assignments

NAIT's Construction Engineering Technology program will provide you with a broad knowledge of the management, estimating and technical aspects of construction, with a primary focus on commercial and residential buildings and related support industries.

You'll develop your drawing interpretation, detail sketching and site surveying skills. You'll also be shown the ins and outs of project planning, contract administration and sub-trade coordination so you can advance your career into site leadership and project management.

The Construction Engineering Technology program works with a program advisory committee made up of industry experts who ensure the program provides students with the knowledge and skills currently required by employers. The program is also accredited by the Canadian Construction Association Gold Seal Certification program and by the Association of Science and Engineering Technology Professionals of Alberta (ASET).