at Northern Alberta Institute of Technology (NAIT) Canada
Overview
NAIT’s 1-year Dental Assisting certificate program will give you the knowledge and skills necessary for direct entry to dental practice. From infection prevention and control to all chairside restorative and specialty procedures, as well as direct patient care and dental practice administration, our program will prepare you to be an integral member of the dental health care team.
Hands-on, industry-relevant training
Our training approach emphasizes practical experience backed by strong theoretical knowledge in the skills and technology necessary to be a successful Dental Assistant. Our program features the following:
30
Application Processing Days
Under Graduate
Program Level
Full Time On Campus
Study Mode
12
Duration
Northern Alberta Institute of Technology (NAIT)
Location
$23436
Tuition Fee
$11000
Average Cost of Living
$115
Application Fee
Get superfast admissions at top Certificate in Dental Assisting institutes in 2024
Benefits of choosing
➤Admission’s guaranteed at Top institutes across the world.
➤Enjoy exclusive application fee waiver’s with Edmissions.
➤Unlimited FREE Counselling sessions with Edmission’s
Experts
➤Get Tips from industry veterans to crack the IELTS exam in 1
week.
➤Assistance with scholarships, loans, forex, student accommodation and visa guidance.
Students who wish to work in Canada require a work permit to do so. A student in Canada can work part-time during the course of his studies and full-time during holidays and semester breaks and post the completion of their course/program.
You can also work part-time on campus at your university.
Duration
Your part-time work permit will be valid for as long as you have a valid study permit.
20 Hours/Week
As a full-time student, you can work for a maximum of 20 hours a week. However, you can work full- time during holidays and breaks.
List
To apply for a work permit, you will need a study permit that mentions that you are allowed to work part-time on campus.
Study Permit
You will need a Social Insurance Number (SIN) to Service Canada. if you wish to work in Canada during the course of your studies. To apply for the same, you need a valid study permit, and you should be a full- time student at a recognized university.
You can work part-time off-campus if you are studying in the Quebec province.
Your part-time work permit will be valid for as long as you have a valid study permit.
As a full-time student, you can work for a maximum of 20 hours a week. However, you can work full- time during holidays and breaks.
To apply for a work permit, you will need a study permit that mentions that you are allowed to work part-time on campus.
You will need a Social Insurance Number (SIN) to Service Canada if you wish to work in Canada during the course of your studies. To apply for the same, you need a valid study permit, and you should be a full- time student at a recognized university.
In Canada, you will need a work permit to get a full-time job in Canada after finishing your studies. You chose a work permit like the Post-Graduation Work Permit (PGWP) if you wish to stay back in Canada and work full-time.
Visit Government of Canada Website for more detail
The Post- Graduation Work Permit (PGWP) allows you to work for three years in Canada if you have completed a two years degree or more.
Application
how can i apply
You can either apply online or download the form and mail the application along with the required documents. Pay your fee and then wait for the decision to come.
List
To apply for the work visa, you need a degree from a recognized and accredited Canadian University along with an intention to stay and work in Canada only temporarily.
When to Apply?
One can apply for the full-time work permit in the first three months post the completion of their course during which the study permit is still valid.
90 days
You will have to wait for 90 days for the decision on your work permit.
3 Years
The work permit is valid for 3 years if you have completed a two years degree program or more.
CAD 255
The fee for the work permit is CAD 255 plus the holder fee and the work permit processing fee.
CAD 1,600
An applicant is guaranteed a minimum salary of CAD 1,600 per month while working in Canada. This amount though varies on the job and the province you are working in.
No Limit
There is no maximum limit, and you can work for as many hours as you want on the full-time work permit.
List
To apply for the work visa, you will need the following documents:
Till a decision is made on your work visa, you can continue to work full time. All you need to have is your completed degree, should have applied for the permit before the expiry of your study permit and you should be allowed to work off-campus.
Disclaimer
The information provided about the work permit is true and complete to the best of our knowledge. All recommendations are made without any guarantee on the part of the author or the publisher. The author and the publisher, therefore, disclaim any liability in connection to and with the use of this information.
30
Application Processing Days
Full Time On Campus
Program Intensity
Under Graduate
Program Level
12
Duration
Any student who wishes to study in Canada requires a student visa. Some of the essential information for the application process is given below.
4 to 6 months
Ideally, one should apply for the study permit at least 4 to 6 months before the commencement of your course/program.
Bank Account
No Need!
There is no need for a blocked bank account to apply for a student visa to Canada.
Course Duration + 3 Months
The student visa is valid for the entire period of your course plus three months.
35 Days
It takes time. It might take up to 35 days post your interview for the application process to complete and for you to finally receive your visa.
Required
It varies from applicant to applicant, but one may have to take part in one or two visa appointments, namely a medical examination and a visa interview.
Application Process
An applicant can either apply online or offline by visiting a visa application centre and submitting their documents. After the analysis of your application, you might be called for an interview.
Visa Fee
The visa application fee for Canada is CAD 150.
833 CAD, 917 CAD
You require a minimum monthly amount to be deposited into your account to prove that you can sustain yourself while studying in Canada. If you are studying in Quebec, you need to have a monthly minimum of CAD 917, and if you are studying in a province except for Quebec, you need to have a minimum of CAD 833 per month.
Required
You will have to pay a medical examination fee and a visa application service fee to the tune of CAD 15 if you visit a visa application centre to apply for your visa.
Required
One has to undergo a series of medical examinations to be deemed fit for a student visa of Canada. The tests mostly include blood and urine tests, chest x-rays and other organ checkups.
Not Required
one doesn’t need to prove their language skills in applying for a Canadian Visa.
Disclaimer: The information provided about the work permit is true and complete to the best of our knowledge. All recommendations are made without any guarantee on the part of the author or the publisher. The author and the publisher, therefore, disclaim any liability in connection to and with the use of this information.
Computer Science & IT
Post-Diploma Certificate in Cybersecurity
Cybersecurity is essential to protecting organizations, networks, applications and users from a world of online threats. You will gain advanced operational skills and security strategies to defend against attacks and manage risk. You will also learn about the technical, legal and political issues regarding cybersecurity.
What You Will Learn
Advanced cybersecurity skills
The Cybersecurity post-diploma certificate will establish you as a leader with essential skills in a high-demand field.
Through the course of this 10-course program, you can expect to learn how to:
12 month
Duration
$ 42000
Tuition
Health Sciences, Nursing and Emergency Services
Diploma in Laboratory and X-Ray Technology Combined
The Combined Laboratory and X-Ray Technology program is unique in that students are trained in both the medical laboratory and x-ray disciplines, practicing predominantly in rural communities. On completion of their training, graduates are able to perform general medical laboratory procedures, general diagnostic radiographic procedures, and electrocardiograms. Students also receive training on information systems and technology in the medical laboratory and diagnostic imaging departments.
What You Will Learn
Hands-on, industry-relevant training
Students attend classes full-time at NAIT for a total of 2 years where they will learn and practice the skills required to be a registered CLXT.
Year 1 of the Combined Laboratory and X-Ray Technology program begins every September and consists of 38 weeks of lectures and hands-on labs that align with current industry standards. This includes two 15-week semesters, and one 8-week intersession located at the NAIT Main Campus.
Upon completion of year 1, the student progresses to an affiliated rural clinical site to complete 40 weeks of Work Integrated Learning (WIL). Students will train alongside technologists where they will apply the knowledge learned in year one and continue to develop their critical thinking and professionalism skills while providing high quality patient care. Scheduled shifts during clinical training will include evenings, nights and weekend days.
Individuals will work alone or alongside physicians, other technologists, nurses and non-medical personnel. The ability to work independently and/or closely with others are important requirements for an effective Combined Lab and X-Ray technologist.
24 month
Duration
$ 29991
Tuition
Engineering & Technology
Diploma in Civil Engineering Technology
Careers that leave a lasting impact
Have a passion for building? Civil Engineering Technology is a 2-year diploma program or 2-and-a-half year co-op diploma program through which you’ll learn how to design and manage construction, infrastructure and research projects.
Our curriculum has been developed with industry input to ensure we cover all of the theoretical and practical elements that are essential within the broad field of civil engineering. With the help of hands-on learning and supportive, experienced instruction, you’ll apply computer-aided design & drafting (CADD) systems to civil engineering problems in the areas of:
24 month
Duration
$ 19890
Tuition
Engineering & Technology
Diploma in Electronics Engineering Technology (Co-op)
Technology like computers, robots, lasers, fibre optics, artificial intelligence and satellite communications all use microelectronic technology.
In this program, you will gain the ability to solve technical and scientific problems with these and other technologies, while learning principles of electricity, embedded systems, communications, industrial electronics and problem solving skills. You'll also learn fault and failure isolation (troubleshooting) skills that are applicable to the immediate needs of employers.
The program emphasizes practical skills and state-of-the-art applications to ensure immediate applicability to the needs of industry.
Hands-on, industry relevant skills:-
Through an emphasis on practical skills that you can take straight to industry, the Electronics Engineering Technology will help you gain a comprehensive understanding of the principles of electricity, microcontrollers, communications, control systems and industrial electronics. You'll be given the opportunity to design and develop complex electronic systems and find solutions to real-world problems.
Additionally, this program will help you improve your:
Co-op:-
This program offers the opportunity to participate in a one semester co-op placement between your first and second year of training. Successful co-op students work in a program related, industry position and gain advanced job-readiness skills. Acceptance into co-op is based on successful completion of first term coursework with a GPA of 2.3.
24 month
Duration
$ 23796
Tuition
Skilled Trades
Certificate in CNC Machinist Technician
You want to learn the skills and knowledge of conventional machining operations to utilize drill presses, lathes, milling machines and various grinding machines, including using Computer Numerical Control (CNC) programming, set up and operation. You will also receive introductory CAD/CAM training, as well as inspection and quality control training.
Successful completion of this 1-year certificate can allow you to challenge the first year apprenticeship exam for the Machinist program.
What You Will Learn
Hands-on, industry-relevant training
Is this program for you?
To be successful as a machinist, you must have:
12 month
Duration
$ 22041
Tuition
Skilled Trades
Diploma in Advanced Welding Technology
The Advanced Welding Technology diploma goes beyond the Alberta Welder Apprenticeship training. It combines advanced technical knowledge, welding skills, and exposure to modern technologies to give a graduate the competitive edge into a career in welding. From skills in fabrication to product innovation and inspection methods, you will gain foundational skills that are in-demand by industry. This two-year program is a direct pathway into apprenticeship trades training at NAIT without having to first be a registered apprentice. In addition, it teaches the knowledge required to be a leader in the industry.
Thanks to the growth of environmental industries, ongoing infrastructure repair and the increasing rate of retirement among existing welders, there are many career paths in this industry for graduates to explore!
What you will learn
Industry-approved training
Students will not only master welding skills but be exposed to technologies that emerge in the welding industry. A student will also learn career essential skills that are in high demand by industry employers. Learning outcomes for this program include being able to:
24 month
Duration
$ 20010
Tuition
Business & Management
Bachelor of Business Administration - Marketing Concentration
The Bachelor of Business Administration (BBA) with Marketing emphasis prepares students to lead organizations in making decisions on corporate branding, public relations, sales, supply chain management and advertising in an immersive environment of critical thinking. The BBA degree with Marketing emphasis focuses on teaching consumer research, measurable strategies and strong communications skills. The goal is to develop your ability for strong analytical processes critical to the operation of business. Marketing emphasis students are led through business cases of ethics, consumer behaviour and sales management. These scenarios will help you understand the decision-making processes of business and think about the many factors that affect marketing campaigns and projects. All marketing-related courses have prerequisites, so it is important to carefully plan the order your studies. Students taking the BBA with a Marketing emphasis can expect to integrate their knowledge of marketing to support different organizational and multi-disciplinary goals in Canadian and international organizations.
48 month
Duration
$ 19410
Tuition
Computer Science & IT
Diploma in Network Engineering Technology
The world is rapidly becoming an accessible knowledge marketplace. Global networks capable of carrying voice, data, graphics and interactive video are a reality. The economic viability of some local and international business is inextricably dependent upon this technology.
This program will provide graduates with advanced skills in analyzing, optimizing, maintaining, implementing and administering computer networks. Emphasis will be placed upon practical skills and state-of-the-art implementations to ensure immediate applicability to industry requirements.
24 month
Duration
$ 17640
Tuition
Business & Management
Diploma in Business Administration - Marketing
Mix creativity, strategic sales and business insight and you’ll get marketing as a result. Marketing requires imagination, keen knowledge of one’s audience and the ability to position products and services against the competition.
In NAIT’s marketing program, you’ll work on practical, hands-on assignments for real-world clients. After completion of our core business courses, you’ll be able to choose 2 electives from a list of 5 course options.
Our 2-year diploma program has been developed in consultation with industry partners and will immerse you in dynamic group-work on real world projects with real clients.
Pursue a field in marketing where ideas are king, and every day is different.
What You Will Learn
Hands-on, industry-relevant skills
In your first year of the program, you will take 10 common courses with other business students, in order to gain foundational core business knowledge. In the second year of studies, you’ll take the required courses to get a specialized marketing diploma upon graduation.
We immerse students in a combination of classroom teaching, industry-relevant case work, simulations and networking. You will develop an understanding of modern business dynamics and learn to work well within culturally diverse organizations
24 month
Duration
$ 19410
Tuition
Engineering & Technology
Diploma in Industrial Heavy Equipment Technology
The Industrial Heavy Equipment Technology diploma program with teach you how to diagnose and repair machinery in the heavy equipment industry competently and safely. The program focuses on highway and off-highway mobile equipment, as well as engine-powered stationary equipment used in mining, logging, trucking, agriculture, gas processing, oilfield servicing and construction.
Industries including mining, logging, trucking, agriculture, transportation, gas processing, oilfield servicing and construction are all in-demand for heavy equipment service personnel with an advanced level of technical training to tackle the challenge of advancing technology.
What You Will Learn
Hands-on, industry-relevant training
Industrial Heavy Equipment Technology is a two-year diploma program consisting of four 15-week semesters. Studies include
The training is divided equally into theoretical and practical learning. Local industrial field trips will be taken.
Train at NAIT
Students can expect to spend, on average
Training is provided at NAIT Main Campus in Edmonton. Some training is also delivered in the NAIT HET Building (11940 - 109 st NW), just north of Main Campus. Labs are fully equipped with mock-ups and training aids, which students disassemble, inspect and reassemble.
24 month
Duration
$ 25164
Tuition
View All Courses by Northern Alberta Institute of Technology (NAIT), Canada
Waterloo
Vancouver
Windsor
Sydney
Halifax
Ottawa
Ottawa
Guelph
West Haven
Kent
Dayon
West Haven
Worcester
Glassboro
San Francisco
San Francisco
Coventry
Birminghame
Leicester
Cardiff
London
London
Nottingham
Coventry
Auckland
Albany
Auckland
Auckland
Palmerston North
London
Lower Hutt
Dunedin
Mohali
Vadodara
Greater Noida
Bangalore
Greater Noida
Phagwara
Rajpura
Kolkata
Abu Dhabi
Ajman
Abu Dhabi
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Dubai
Ras Al Khaimah
Ras Al Khaimah
Latest Blog Posts
Trending Blog Posts
Search, Shortlist, Apply and get accepted! It’s that Simple to pursue your dream to Study abroad with Edmissions. Our team of experts provide you the right guidance that helps you to take admission in your dream college in countries like Canada, the USA, the UK
© 2021-2024 Edmissions - All rights reserved.
TALK TO OUR EXPERTS