Diploma in Animal Health Technology

at Northern Alberta Institute of Technology (NAIT) Canada

Technology like computers, robots, lasers, fibre optics, artificial intelligence and satellite communications all use microelectronic technology.

In this program, you will gain the ability to solve technical and scientific problems with these and other technologies, while learning principles of electricity, embedded systems, communications, industrial electronics and problem solving skills. You'll also learn fault and failure isolation (troubleshooting) skills that are applicable to the immediate needs of employers.

The program emphasizes practical skills and state-of-the-art applications to ensure immediate applicability to the needs of industry.

Hands-on, industry relevant skills:-
Through an emphasis on practical skills that you can take straight to industry, the Electronics Engineering Technology will help you gain a comprehensive understanding of the principles of electricity, microcontrollers, communications, control systems and industrial electronics. You'll be given the opportunity to design and develop complex electronic systems and find solutions to real-world problems. 

The Advanced Welding Technology diploma goes beyond the Alberta Welder Apprenticeship training. It combines advanced technical knowledge, welding skills, and exposure to modern technologies to give a graduate the competitive edge into a career in welding. From skills in fabrication to product innovation and inspection methods, you will gain foundational skills that are in-demand by industry. This two-year program is a direct pathway into apprenticeship trades training at NAIT without having to first be a registered apprentice. In addition, it teaches the knowledge required to be a leader in the industry.

Thanks to the growth of environmental industries, ongoing infrastructure repair and the increasing rate of retirement among existing welders, there are many career paths in this industry for graduates to explore!

What you will learn
Industry-approved training
Students will not only master welding skills but be exposed to technologies that emerge in the welding industry. A student will also learn career essential skills that are in high demand by industry employers. Learning outcomes for this program include being able to:

• Identify safety hazards and comply with legislation
• Operate and maintain welding equipment. To perform welds using processes such as shielded metal arc, gas tungsten, and wire feed processes including gas metal arc, flux core, and metal core
• Perform various thermal cutting processes
• Demonstrate and analyze product creation and efficiencies
• Identify and describe metals and their properties
• Demonstrate effective written and verbal communications skills appropriate for the industry

The Digital Media and IT (DMIT) program is multi-disciplinary in its approach. Spanning a range of career opportunities from business analyst to visual designer, this innovative program allows you the ability to meet industry demand while developing skills aligned with your individual talents and inclinations.

In the Computer Software Development emphasis, you will learn how to design and implement scalable software application solutions, including how to develop, test, document, deploy and support your software.

What You Will Learn
Hands-on, industry-relevant skills
The Computer Software Development area of emphasis (formerly Application Development) teaches you to design and implement scalable application solutions, including developing, testing, documentation, deployment and support. You will also learn how to design, create and maintain databases for use in various applications.

The courses in this area of emphasis include instruction in various programming languages and tools to support software development, including Oracle, C#, Java, SQL, .NET, JavaScript and PHP.

These courses will show you how to:

• Write, test, debug, implement and maintain computer software programs
• Design, create, and maintain databases utilizing industry best practices, including Structured Query Language (SQL)
• Develop web applications
• Generate system deliverables using various System Development Life Cycle (SDLC) methodologies
• Develop native iOS applications
• Develop native Android applications

Co-op Opportunities
As a result of DMIT's close connection with industry, various co-op opportunities exist for students in the DMIT program. Many companies offer our students paid co-op positions that provide direct experience in specific areas of study. Co-op is also seen as a staffing strategy for many organizations.

The Digital Media and IT (DMIT) program is multi-disciplinary in its approach. Spanning a range of career opportunities from business analyst to visual designer, this innovative program allows you the ability to meet industry demand while developing skills aligned with your individual talents and inclinations.

In the Game Programming area of emphasis, you will learn how to give life to video games. You will create and implement game code and scripts that support environments, characters, vehicles, cameras and special effects and allow them to interact with each other.

What You Will Learn
Hands-on, industry-relevant skills
The courses in this area of emphasis offer a multi-language approach to object-oriented programming (OOP), which is an approach to designing modular, reusable software systems. You'll also learn how multi-language programming functions on various game engines and platforms.

You will become familiar with programming languages such as C++, C# and JavaScript, languages that are at the core of game programming. You will then learn how to plan and create small games – on your own as well as with your classmates.

Co-op Opportunities
As a result of DMIT's close connection with industry, various co-op opportunities exist for students in the DMIT program. Many companies offer our students paid co-op positions that provide direct experience in specific areas of study. Co-op is also seen as a staffing strategy for many organizations.

Have you already earned an IT-related diploma? You’ve configured, overcome challenges and provided solutions, you know how to make IT work, and are now ready to learn why IT works. You want to design and integrate complex network solutions. The BAIST program will provide the skills and knowledge to take you to the next level. BAIST – Designing IT!”

What You Will Learn
Network Management Major
This major involves highly specialized preparation geared toward managing the planning, installation and operations of computer networks in very large enterprises.  After graduation, you will be prepared for career opportunities as a network manager, network engineer or network administrator.

In this major you  will learn to:

• Use network operating systems, management tools and protocol analysis tools
• Design, analyze and manage networks, LANs and WANs
• Manage advanced server configuration, network LAN and advanced WAN protocols, and network hardware resources
• Provide network client support, and monitor and optimize network performance

The healthcare industry continues to see a rapid increase in the usage of advanced medical diagnostic and therapeutic equipment to provide the highest level of patient care possible. As our dependence on high-tech equipment and technical expertise required by medical professionals increases, so have the technology-related risks to patients and clinical staff.

Biomedical engineering technologist careers have evolved to help manage technology-related risks in the health-care industry through the entire lifecycle of medical devices, including specification, inspection, calibration, repair and maintenance, and technical troubleshooting.

The Biomedical Engineering Technology program will provide you with fundamental knowledge and hands-on experience with electronics, microcontroller applications, computer network systems and medical imaging systems. You'll also become familiar with medical laboratory practices, anatomy, physiology and health technology management.

What You Will Learn
Hands-on, industry-relevant training
The Biomedical Engineering Technology program will provide you with the skills of an electronic technologist with a specialized focus on biomedical equipment technology.
In your first year of study you will learn about electronics, microcontroller programming, math and computer systems. 

• Biomedical instrumentation
• X-ray and diagnostic imaging equipment
• Medical laboratory instrumentation

Supplementary courses in anatomy and physiology and medical equipment management complete the medical specialization.

Co-op
Students may be eligible to participate in a one semester co-op placement between their first and second year of training. Successful co-op students work in a program related, industry position and gain advanced job-readiness skills. Acceptance into co-op requires successful completion of first term coursework with a GPA of 2.3. 

The Baking and Pastry Arts diploma program focuses on the art and science of bread, cake and pastry making, including

• Cake design and decorating
• Confectionery training (chocolate and sugar)
• Artisan-style baking
• Frozen desserts

There is also a focus on culinary fundamentals, international and specialty baking, baking for alternative diets, business, customer service and showpiece making.

Using NAIT’s fully equipped bakery and pastry arts training lab, you will learn to safely operate and maintain the kinds of equipment used in a variety of bakery, pastry arts and confectionery operations.

What You Will Learn
Hands-on, industry-relevant skills
The 2-year Baking and Pastry Arts diploma will train you in traditional, contemporary and modern baking methods. The program provides hands-on experience in the art and science of bread, cake and pastry production, including cake design and decorating, confectionary training (chocolate and sugar), artisan-style baking and frozen desserts.

This practical knowledge is complemented by training in:

• Baking theory
• Nutrition
• Baking for alternative diets
• Showpiece making
• Trade calculations
• Sanitation
• Safety
• Business concepts
• Customer service

Chemical Engineering Technology is a two-year diploma program that prepares the graduate for employment in the hydrocarbon and chemical processing industry (downstream petroleum industry). The program deals with the processing of oil, natural gas and bitumen into final products such as motor gasoline, diesel or jet fuel, propane, butane, utility gas and others. The program includes the study of the production of secondary petrochemicals such as ethylene, vinyl chloride, methanol and others.

NAIT’s 1-year Dental Assisting certificate program will give you the knowledge and skills necessary for direct entry to dental practice. From infection prevention and control to all chairside restorative and specialty procedures, as well as direct patient care and dental practice administration, our program will prepare you to be an integral member of the dental health care team.

Hands-on, industry-relevant training
Our training approach emphasizes practical experience backed by strong theoretical knowledge in the skills and technology necessary to be a successful Dental Assistant. Our program features the following:

•  38-week full-time program: two 15-week semesters and an 8-week intersession.
•  Small group learning, which allows for the optimum student-to-instructor ratio
•  Practical, hands-on approach to learning in labs, as well as through clinical placements within the dental community
•  Providing treatment to both peers and the general public in our fully equipped onsite dental clinic

NAIT’s Materials Engineering Technology Program prepares students for a diverse and rewarding career in their profession. Our graduates have employment opportunities in a wide variety of industrial settings including oil and gas, chemical processing, mining, construction, pulp and paper and research and development.

A Materials Engineering Technologist is an important member of the engineering team. Our curriculum has been developed in close co-operation with industry leaders ensuring our students have relevant hands on experience and theoretical instruction. They will have a working knowledge of the properties and behavior of engineering materials in a range of environments.

A Materials Engineering Technologist’s expertise is sought after by industry for their understanding of metals, polymers, ceramics and composites. Technologists give advice in material selection, asset and integrity inspections, weld inspections and fabrication. In laboratory settings they are involved in research and development, failure analysis and material testing. Many of our Alumni have gone on to start their own successful businesses and employ our graduates.