Diploma in Business Administration in Management

at Northern Alberta Institute of Technology (NAIT) Canada

Technology like computers, robots, lasers, fibre optics, artificial intelligence and satellite communications all use microelectronic technology.

In this program, you will gain the ability to solve technical and scientific problems with these and other technologies, while learning principles of electricity, embedded systems, communications, industrial electronics and problem solving skills. You'll also learn fault and failure isolation (troubleshooting) skills that are applicable to the immediate needs of employers.

The program emphasizes practical skills and state-of-the-art applications to ensure immediate applicability to the needs of industry.

Hands-on, industry relevant skills:-
Through an emphasis on practical skills that you can take straight to industry, the Electronics Engineering Technology will help you gain a comprehensive understanding of the principles of electricity, microcontrollers, communications, control systems and industrial electronics. You'll be given the opportunity to design and develop complex electronic systems and find solutions to real-world problems. 

NAIT's Radio and Television programs are 2 distinct, yet interrelated full-time diploma programs. Each of these dynamic 2-year programs takes a non-traditional approach to teaching that will provide you with learning opportunities through hands-on experiences.

Undertake the typical job functions found in radio and television stations by acting as the staff for NAIT's campus radio station (NR92) and television newsroom (NAIT NewsWatch). Using industry standard digital equipment and labs, and while working in modern studios, you'll hone written, technical, communicative and production competencies.

Our instructors are highly-qualified professionals with years of industry experience and our program is well-recognized across the country. If you flip on your TV or radio at any given time, you're likely to see or hear NAIT alumni working across North America.

Respiratory Therapists are dedicated to the diagnosis, treatment, rehabilitation and education of patients with heart and lung disorders. As a Respiratory Therapist, you’ll work with patients of all ages, from infants and children to adults and geriatrics. The Respiratory Therapist is a crucial life-saving and life-supporting professional, and as a NAIT graduate you’ll be well equipped to work in a wide variety of hospital and health care settings.

What You Will Learn
Hands-on, industry-relevant training
Learn to plan and implement diagnostic procedures for patients suffering from a wide range of heart and lung disorders. This 3-year diploma program will feature simulation experience, with classroom and lab instruction, combined with clinical rotations in various hospital settings. The program features hands-on training in areas such as:

• Human anatomy, physiology, pharmacology and pathophysiology
• Airway management and cardiopulmonary testing, monitoring and resuscitation
• Assessment of cardio-respiratory patient status; ventilator support; testing and evaluation of respiratory equipment

You can expect to spend, on average:

• 27 hours per week attending classes over the course of a semester.
• 10 to 15 hours per week studying and completing class assignments.
• Upon successful completion of the RET program the graduate is eligible to challenge the Canadian Board for Respiratory Care (CBRC) entry-to-practice certification examination to become a registered respiratory therapist.
• In order to practice as a Respiratory Therapist in the province of Alberta, technologists are required to be registered with the College and Association of Respiratory Therapists of Alberta to obtain a license to practice.

Computers play role in every segment of modern society. Growing demand and advances in miniature, solid-state microprocessor technology have sparked the development of smaller, less expensive and more powerful computers, and increased the need for well-trained technical personnel.
In the 2-year Computer Engineering Technology diploma program, you'll design, build and program computers, gain skills in the hardware and software aspects of microcomputers and their applications, and receive extensive hands-on training.

Hands-on, industry-relevant skills
In Computer Engineering Technology, you'll be trained in both computer hardware and software, including concepts related to computer architecture fundamentals, industrial electronics and embedded controllers using analog and digital integration. You'll become fluent in the assembly language programming of micro-controllers, advanced programming languages such as C#, Windows application development, database concepts and dynamic web development.
Our hands-on learning environment and industry focus will provide you with the skills and knowledge you'll need to secure a rewarding career as a computer engineering technologist.

In this program, you'll learn about:

• Computer programming, including C#, SQL, HTML5+, CSS3, PHP5, ASP.NET, JavaScript, AJAX, jQuery and ladder logic on PLCs to monitor and control industrial equipment
• System analysis and design
• Electronic circuit design, implementation, debugging, simulation and measurement
• Embedded system implementation
• Interfacing sensors, actuators and other electronic device to computer platforms
• Hardware design and interfacing
• Analytical thinking and problem-solving skills
• Oral and written communication skills
• Interpersonal and teamwork skills
• Time management and other professional skills

Co-op option
This program has a co-op option that will be available to you once you've completed at least 2 academic terms. This hands-on work expereince will provide career development training, enabling you to build advanced job readiness skills.

Diagnostic Medical Sonographers are highly trained, in-demand professionals who use ultrasounds to produce and record images of important organs, masses and fetal images. This hands-on accredited program will allow you the opportunity to participate in clinical rotations in major Alberta hospitals. You’ll receive training on industry-standard equipment and get the opportunity to learn on the same technology you’ll use in your practicum placement – and career.

Do you have an eye for design?
The Engineering Design Technology program will provide you with both a theoretical and practical education that will serve as the foundation for a career as an engineering designer.

This program could be a great fit for you if you:

• Demonstrate a high attention to detail
• Have good math and physics skills
• Enjoy working with computers
• Enjoy working in an office environment

Engineering Design Technology presents a broad spectrum of engineering content, primarily focused on the fundamental principles of engineering design and computer applications common to a variety of engineering disciplines.

The Combined Laboratory and X-Ray Technology program is unique in that students are trained in both the medical laboratory and x-ray disciplines, practicing predominantly in rural communities. On completion of their training, graduates are able to perform general medical laboratory procedures, general diagnostic radiographic procedures, and electrocardiograms. Students also receive training on information systems and technology in the medical laboratory and diagnostic imaging departments.

What You Will Learn
Hands-on, industry-relevant training
Students attend classes full-time at NAIT for a total of 2 years where they will learn and practice the skills required to be a registered CLXT.

Year 1 of the Combined Laboratory and X-Ray Technology program begins every September and consists of 38 weeks of lectures and hands-on labs that align with current industry standards. This includes two 15-week semesters, and one 8-week intersession located at the NAIT Main Campus.

Upon completion of year 1, the student progresses to an affiliated rural clinical site to complete 40 weeks of Work Integrated Learning (WIL). Students will train alongside technologists where they will apply the knowledge learned in year one and continue to develop their critical thinking and professionalism skills while providing high quality patient care. Scheduled shifts during clinical training will include evenings, nights and weekend days.

Individuals will work alone or alongside physicians, other technologists, nurses and non-medical personnel. The ability to work independently and/or closely with others are important requirements for an effective Combined Lab and X-Ray technologist.

Businesses and organizations are finding ways to become smarter, more efficient and make better decisions. Data has become a key aspect in finding a competitive advantage and predicting the future.

Data analytics is a field that combines data, technology, processes and analysis to enhance business decisions and drive success. The Data Analytics post-diploma certificate program provides you with the skills needed to inform real-world business decision-making and planning through data insights, analysis, visualizations and predictions.

Play a key role in an organization by mastering the art of converting data into information and turning information into action

What You Will 
Data-driven, industry-relevant skills
This post-diploma certificate builds on foundational knowledge and skills acquired in related diploma programs and prepares graduates for employment in the field of data analytics.

This 10-course program, which may be completed full- or part-time, will prepare you for Data Analyst roles in a wide variety of industries. Upon successful completion of the program, you will be able to:

• Design and assemble data sets for further manipulation and analysis
• Interpret data sets and communicate findings to make data-driven decisions and support organizational goals
• Use data analytics to provide business insights and organizational opportunities.
• Apply security, privacy, ethics, regulations and information and data management principles throughout the data lifecycle
• Use industry leading artificial intelligence, machine learning and analytics tools to analyze, interpret and present data

The Industrial Heavy Equipment Technology diploma program with teach you how to diagnose and repair machinery in the heavy equipment industry competently and safely. The program focuses on highway and off-highway mobile equipment, as well as engine-powered stationary equipment used in mining, logging, trucking, agriculture, gas processing, oilfield servicing and construction.

Industries including mining, logging, trucking, agriculture, transportation, gas processing, oilfield servicing and construction are all in-demand for heavy equipment service personnel with an advanced level of technical training to tackle the challenge of advancing technology.

What You Will Learn
Hands-on, industry-relevant training
Industrial Heavy Equipment Technology is a two-year diploma program consisting of four 15-week semesters. Studies include

• Fluid mechanics
• Petroleum chemistry
• Fuel and hydraulic systems
• Electricity and electronics
• Fleet maintenance
• Communications
• Leadership

The training is divided equally into theoretical and practical learning. Local industrial field trips will be taken.

Train at NAIT
Students can expect to spend, on average

• 30 hours per week attending classes over the course of a semester
• 10 to 12 hours per week studying and completing class assignments

Training is provided at NAIT Main Campus in Edmonton. Some training is also delivered in the NAIT HET Building (11940 - 109 st NW), just north of Main Campus. Labs are fully equipped with mock-ups and training aids, which students disassemble, inspect and reassemble.

Learn how to recruit new employees, manage benefits and enhance work environments – Human Resource Management is essential to every organization.

Our dynamic 2-year program combines classroom theory with hands-on case studies and mock interview scenarios. We cover a wide range of topics including organizational change, diversity in the workplace, employment law, contract negotiations and professional culture.

Join a fascinating field powered by people. HR practitioners makes significant contributions to the success of every organization.

What You Will Learn
Hands-on, industry-relevant skills
In your first year of the program, you will take 10 common courses in order to gain foundational core business knowledge. In the second year of studies, you’ll take the required courses in Human Resource Management to get a specialized diploma upon graduation.

By the end of the program, you’ll be able to estimate, forecast and plan an organization’s human resource needs by recruiting talent, assessing risks and benefits of HR plans and setting strategic, achievable goals.