Diploma in Medical Radiologic Technology

at Northern Alberta Institute of Technology (NAIT) Canada

Overview

Medical Radiologic Technology is the art and science of correctly positioning the patient and X-ray equipment to produce and record images for the purpose of visualizing the extent of disease or injury to a patient. The majority of X-ray examinations are performed in the Diagnostic Imaging Department; however, they are also carried out in the operating room, in the emergency department, on wards and in specialized intensive care units.

The Medical Radiologic Technology program teaches students how to perform X-rays, including evaluating the diagnostic quality of images, patient care and quality control. Students also gain expert knowledge in radiation safety and protection practices. Many of the radiographic examinations and procedures involve working alongside physicians, other technologists, nurses and non-medical personnel.
 

Read More

30

Application Processing Days

Under Graduate

Program Level

Fact & Figures

Full Time On Campus

Study Mode

24

Duration

Northern Alberta Institute of Technology (NAIT)

Location

Diploma in Medical Radiologic Technology Assistant Fee

$32688

Tuition Fee

$11000

Average Cost of Living

$115

Application Fee

Diploma in Medical Radiologic Technology Admissions Requirements

  • Minimum Level of Education Required: To be accepted into this program, applicants must have Grade 12 / High School Diploma or equivalent including the following required course(s):
    • English 30-1 or English 30-2 75%
    • Math 30-1 or Math 30-2 75%
    • Biology 30 75%
    • Physics 30 75%
plane

Get superfast admissions at top Diploma in Medical Radiologic Technology institutes in 2024

Benefits of choosing

edmission

Admission’s guaranteed at Top institutes across the world.

Enjoy exclusive application fee waiver’s with Edmissions.

Unlimited FREE Counselling sessions with Edmission’s Experts

Get Tips from industry veterans to crack the IELTS exam in 1 week.

Assistance with scholarships, loans, forex, student accommodation and visa guidance.

Where would you like to study*

Work Permit Canada

Students who wish to work in Canada require a work permit to do so. A student in Canada can work part-time during the course of his studies and full-time during holidays and semester breaks and post the completion of their course/program.

Rules for getting a part-time work visa in Canada

You can also work part-time on campus at your university.

Work Permit

Duration

Your part-time work permit will be valid for as long as you have a valid study permit.

Working Hours

20 Hours/Week

As a full-time student, you can work for a maximum of 20 hours a week. However, you can work full- time during holidays and breaks.

Document Required to Work in Canada

List

To apply for a work permit, you will need a study permit that mentions that you are allowed to work part-time on campus.

Social Insurance Number

Study Permit

You will need a Social Insurance Number (SIN) to Service Canada. if you wish to work in Canada during the course of your studies. To apply for the same, you need a valid study permit, and you should be a full- time student at a recognized university.

You can work part-time off-campus if you are studying in the Quebec province.

Duration of Work Permit Canada

Your part-time work permit will be valid for as long as you have a valid study permit.

Work Hours Canada

As a full-time student, you can work for a maximum of 20 hours a week. However, you can work full- time during holidays and breaks.

Document Required to Work in Canada

To apply for a work permit, you will need a study permit that mentions that you are allowed to work part-time on campus.

Social Insurance Number

You will need a Social Insurance Number (SIN) to Service Canada if you wish to work in Canada during the course of your studies. To apply for the same, you need a valid study permit, and you should be a full- time student at a recognized university.

Working after completing your course

In Canada, you will need a work permit to get a full-time job in Canada after finishing your studies. You chose a work permit like the Post-Graduation Work Permit (PGWP) if you wish to stay back in Canada and work full-time.

Visit Government of Canada Website for more detail

Post-Graduation Work Permit (PGWP)

The Post- Graduation Work Permit (PGWP) allows you to work for three years in Canada if you have completed a two years degree or more.

Application

how can i apply

You can either apply online or download the form and mail the application along with the required documents. Pay your fee and then wait for the decision to come.

Application Documents Required

List

To apply for the work visa, you need a degree from a recognized and accredited Canadian University along with an intention to stay and work in Canada only temporarily.

When to Apply?

One can apply for the full-time work permit in the first three months post the completion of their course during which the study permit is still valid.

How long does it take?

90 days

You will have to wait for 90 days for the decision on your work permit.

Duration

3 Years

The work permit is valid for 3 years if you have completed a two years degree program or more.

Fees

CAD 255

The fee for the work permit is CAD 255 plus the holder fee and the work permit processing fee.

Monthly Wages

CAD 1,600

An applicant is guaranteed a minimum salary of CAD 1,600 per month while working in Canada. This amount though varies on the job and the province you are working in.

Work Hours Canada

No Limit

There is no maximum limit, and you can work for as many hours as you want on the full-time work permit.

Required Documents

List

To apply for the work visa, you will need the following documents:

  • Forms: IMM 5710, IMM 5476 and IMM 5475;
  • Graduation Proof
  • Proof of payment of work permit fees
  • Copies of your travel and identification documents, passport pages and current immigration document.

Till a decision is made on your work visa, you can continue to work full time. All you need to have is your completed degree, should have applied for the permit before the expiry of your study permit and you should be allowed to work off-campus.

Information

Disclaimer

The information provided about the work permit is true and complete to the best of our knowledge. All recommendations are made without any guarantee on the part of the author or the publisher. The author and the publisher, therefore, disclaim any liability in connection to and with the use of this information.

Detailed Program and Facts

30

Application Processing Days

Full Time On Campus

Program Intensity

Under Graduate

Program Level

24

Duration

Study Visa

Student Visa For Canada

Any student who wishes to study in Canada requires a student visa. Some of the essential information for the application process is given below.

When Should I Apply?

4 to 6 months

Ideally, one should apply for the study permit at least 4 to 6 months before the commencement of your course/program.

Bank Account

No Need!

There is no need for a blocked bank account to apply for a student visa to Canada.

Duration of visa

Course Duration + 3 Months

The student visa is valid for the entire period of your course plus three months.

Time to Wait for Visa

35 Days

It takes time. It might take up to 35 days post your interview for the application process to complete and for you to finally receive your visa.

Appointment

Required

It varies from applicant to applicant, but one may have to take part in one or two visa appointments, namely a medical examination and a visa interview.

How you can apply

Application Process

An applicant can either apply online or offline by visiting a visa application centre and submitting their documents. After the analysis of your application, you might be called for an interview.

Fee

Visa Fee

The visa application fee for Canada is CAD 150.

Minimum Funds

833 CAD, 917 CAD

You require a minimum monthly amount to be deposited into your account to prove that you can sustain yourself while studying in Canada. If you are studying in Quebec, you need to have a monthly minimum of CAD 917, and if you are studying in a province except for Quebec, you need to have a minimum of CAD 833 per month.

Any other expenses

Required

You will have to pay a medical examination fee and a visa application service fee to the tune of CAD 15 if you visit a visa application centre to apply for your visa.

Medical Examination

Required

One has to undergo a series of medical examinations to be deemed fit for a student visa of Canada. The tests mostly include blood and urine tests, chest x-rays and other organ checkups.

Language Skills

Not Required

one doesn’t need to prove their language skills in applying for a Canadian Visa.

Disclaimer: The information provided about the work permit is true and complete to the best of our knowledge. All recommendations are made without any guarantee on the part of the author or the publisher. The author and the publisher, therefore, disclaim any liability in connection to and with the use of this information.

English Test Requirement

6.5

Minimum Overall Score

6.0

Minimum Listening

6.0

Minimum Reading

6.0

Minimum Writing

6.5

Minimum Speaking

83.0

Minimum Overall Score

Other Courses by Northern Alberta Institute of Technology (NAIT),Canada

The Advanced Plumbing Technology diploma is a unique opportunity to get the technical and career essential skills you need to succeed in the plumbing industry. The diploma program offers a direct pathway into trades training at NAIT without having to first be a registered apprentice and can also serve as a pathway to apprenticeship.

The program focuses on theory and hands-on training required to master installation, repair, perform mechanical system maintenance and more. You will learn specific technical knowledge and get hands-on skills and experience. You will also get to explore new technologies and systems such as water recycling and re-use, solar and geothermal heating systems and water conservation.

Industry-approved training
A career in plumbing calls for an understanding of both technical knowledge and career essential skills. Learning outcomes for this program include:

  • Industry standards, legislation and workplace expectations
  • Design, installation and maintenance of all relevant systems, including:
    • Gas systems
    • Hydronic heating systems and gas appliances
    • Potable and non-potable water systems
    • Service drainage, waste and vent (DWV) systems
  • Design, interpretation and conversion of drawings for plumbing installations
  • Mathematical concepts for plumbing installations, and
  • Effective written and verbal communication tools

The program content and structure aligns with Alberta Credential Framework expectations. After completing the program, you will have the technical training comparable to a journeyperson plumber.
After completing the program, you will be eligible to enter into an apprenticeship and complete apprenticeship hours to receive a journeyperson’s certificate.

24 month

Duration

$ 20010

Tuition

Health Sciences, Nursing and Emergency Services

Diploma in Dental Technology

This nationally recognized program provides a wide range of training and will give you the skills necessary to make full or partial dentures, repair crowns, bridges and orthodontic appliances. You’ll learn the art and science of creating corrective devices for natural teeth and tissues.

A dental technologist is a master of their craft and an essential member of the dental-health team. To be successful, you’ll need to display meticulous attention to detail and an equal combination of technical skills and artistry.

What You Will Learn
Hands-on, industry-relevant training 
Throughout the program, you’ll recreate the appearance of natural teeth in fixed restorations such as crowns and implant restorations using porcelain, metal alloys and ceramic materials. For corrective devices like orthodontic appliances, you’ll learn the physical and biological forces of handling waxes, wires and acrylic materials.

You’ll have an individual workstation in the dental lab, complete with the latest industry-standard equipment, like:

  • press ceramic furnace
  • digital laboratory scanner
  • acrylic injection system
  • pressure thermal-forming machine

You can expect to spend, on average

  • 32 hours per week attending classes over the course of a semester
  • 10-15 hours per week studying and completing class assignments

24 month

Duration

$ 26085

Tuition

In the Millwork and Carpentry program, you will gain hands-on skills in the design and construction of wood structures, cabinets, shelving units and furniture. This certificate program will explore the two traditional woodworking trades of Cabinetmaker and Carpenter, with an emphasis on tools and safety.

Students specialize in either the cabinetmaking or carpentry stream. Each stream emphasizes materials and techniques relevant to that trade specialization.

The Cabinetmaking stream (Millwork), introduces students to construction of both upper and lower casework, complete with doors, drawer, mouldings, hardware and exposure to a variety of different materials used in the trade.

The Carpentry stream provides an introduction to residential home construction in foundations, framing and finishing carpentry.experience related to their stream.

What You Will Learn
Hands-on, industry-relevant training
Successful Millwork and Carpentry certificate graduates display the following attributes.

  • Safety conscious
  • Work well with tools
  • Work well within a team environment
  • The ability to stand, crouch and kneel for long periods of time
  • Manual dexterity
  • The ability to lift heavy loads
  • The ability to solve arithmetic problems accurately
  • A positive and professional learning attitude, with an interest in woodworking

12 month

Duration

$ 17205

Tuition

Computers play role in every segment of modern society. Growing demand and advances in miniature, solid-state microprocessor technology have sparked the development of smaller, less expensive and more powerful computers, and increased the need for well-trained technical personnel.
In the 2-year Computer Engineering Technology diploma program, you'll design, build and program computers, gain skills in the hardware and software aspects of microcomputers and their applications, and receive extensive hands-on training.

Hands-on, industry-relevant skills
In Computer Engineering Technology, you'll be trained in both computer hardware and software, including concepts related to computer architecture fundamentals, industrial electronics and embedded controllers using analog and digital integration. You'll become fluent in the assembly language programming of micro-controllers, advanced programming languages such as C#, Windows application development, database concepts and dynamic web development.
Our hands-on learning environment and industry focus will provide you with the skills and knowledge you'll need to secure a rewarding career as a computer engineering technologist.

In this program, you'll learn about:

  • Computer programming, including C#, SQL, HTML5+, CSS3, PHP5, ASP.NET, JavaScript, AJAX, jQuery and ladder logic on PLCs to monitor and control industrial equipment
  • System analysis and design
  • Electronic circuit design, implementation, debugging, simulation and measurement
  • Embedded system implementation
  • Interfacing sensors, actuators and other electronic device to computer platforms
  • Hardware design and interfacing
  • Analytical thinking and problem-solving skills
  • Oral and written communication skills
  • Interpersonal and teamwork skills
  • Time management and other professional skills

Co-op option
This program has a co-op option that will be available to you once you've completed at least 2 academic terms. This hands-on work expereince will provide career development training, enabling you to build advanced job readiness skills.

24 month

Duration

$ 19944

Tuition

Instrumentation Engineering Technology (IET) is a nationally accredited program that provides a comprehensive course of studies in industrial measurement and control.
With a provincial economy that is largely industrial-based, instrumentation has become an extremely important field. Industries are also becoming increasingly automated to improve productivity, conserve energy, and reduce pollution. This has created a strong demand for trained professionals in the instrumentation technology field across industries ranging from industrial automation and electronics to oil and gas.

In the Instrumentation Engineering Technology program, you can expect to gain the knowledge and skills needed for a successful career in instrumentation technology. The program involves detailed studies of the principles and application of pneumatic, electronic, and microcomputer measurement and control systems.
Access to state-of-the-art laboratories and a hands-on approach to learning provide students with job-ready experience.

Skills you will acquire
Over the course of the program, you will learn how to:

  • Apply principles of process control to analyze and optimize the performance of industrial processes.
  • Install and maintain process instruments.
  • Install and maintain analytical instruments and sampling systems.
  • Configure and troubleshoot industrial  controllers.
  • Install, program and troubleshoot industrial controllers.
  • Design and specify measurement, safety and control systems for industrial applications.
  • Use computer hardware and software relevant to instrumentation.
  • Work in a safe and professional manner following regulatory and industry specific work practices.
  • Communicate effectively through written and verbal means.
  • Use tools appropriate to the instrumentation field in a safe and effective matter.
  • Participate as a member of an effective team

Practicum/Co-op/Work Experience
Students may be eligible to participate in a 4 or 8 month co-op placement once they complete all level 1 courses, and before they complete all the level 2 courses. Successful co-op students work in a program-related industry position and gain advanced job-readiness skills. Acceptance into our co-op program is based on successful completion of first term coursework with a minimum GPA of 2.7.

24 month

Duration

$ 21450

Tuition

The Geomatics Engineering Technology program provides training in the collection, analysis, storage, distribution and application of spatial and three-dimensional data used in land development. The economic growth of any country involves the development of natural resources, construction of large public works projects and the expansion of urban centres. This growth requires trained personnel to:

  • Locate and map physical features on the land
  • Determine property boundaries for property titles
  • Perform surveys to locate and build transportation systems

Lay out large industrial complexes such as refineries, dam sites, power, pipelines, and surface and underground mining operations
The Geomatics Engineering Technology program emphasizes the use of new technologies for data collection, including electronic equipment for measuring, earth circling satellites for positioning and computers for processing data and generating plans for use in a wide variety of professional disciplines.

24 month

Duration

$ 20526

Tuition

Chemical Engineering Technology is a two-year diploma program that prepares the graduate for employment in the hydrocarbon and chemical processing industry (downstream petroleum industry). The program deals with the processing of oil, natural gas and bitumen into final products such as motor gasoline, diesel or jet fuel, propane, butane, utility gas and others. The program includes the study of the production of secondary petrochemicals such as ethylene, vinyl chloride, methanol and others.

24 month

Duration

$ 19092

Tuition

Mix creativity, strategic sales and business insight and you’ll get marketing as a result. Marketing requires imagination, keen knowledge of one’s audience and the ability to position products and services against the competition.

In NAIT’s marketing program, you’ll work on practical, hands-on assignments for real-world clients. After completion of our core business courses, you’ll be able to choose 2 electives from a list of 5 course options.

Our 2-year diploma program has been developed in consultation with industry partners and will immerse you in dynamic group-work on real world projects with real clients.

Pursue a field in marketing where ideas are king, and every day is different.

What You Will Learn
Hands-on, industry-relevant skills
In your first year of the program, you will take 10 common courses with other business students, in order to gain foundational core business knowledge. In the second year of studies, you’ll take the required courses to get a specialized marketing diploma upon graduation.

We immerse students in a combination of classroom teaching, industry-relevant case work, simulations and networking. You will develop an understanding of modern business dynamics and learn to work well within culturally diverse organizations

24 month

Duration

$ 19410

Tuition

The Management program is for people who want to lead in business, industry, government and not-for-profit sectors. Students will benefit from our business case studies, industry guest speakers and in depth instruction.

Hands-on, industry-relevant skills:-
In your first year of the program, you will take 10 foundational courses that set you up with core business knowledge. In your second year of studies, you will take the required courses to get a specialized diploma in management.

This program develops you as a leader, whether in organizational management positions or key advisor roles. We will help you develop an understanding of modern business dynamics and organizational culture. We teach management skills including accounting, finance and marketing knowledge to foster decision-making in a competitive environment. Upon graduation, you will have the skills and knowledge required for entry to mid-level positions, which will open doors to senior-level management. 

Hands-on learning:-
We immerse students in a combination of classroom teaching, industry-relevant case work, simulations and networking. You will develop an understanding of modern business dynamics and learn to work well within culturally diverse organizations.

24 month

Duration

$ 19410

Tuition

Business & Management

Bachelor of Technology

NAIT's Bachelor of Technology degree is the only program of its kind in Alberta and one of just a few similar programs in Canada. If you've graduated with a recognized 2-year technology diploma, the BTech program offers the opportunity to earn a baccalaureate degree with 2 additional years of study.

The BTech degree has been developed to help you bridge the gap between the job you started as a technologist and a career in management. We've received industry demand for leading-edge technologists who have the technical theory, innovative skills, and ethical and social awareness required for sustainable industry. We have also been challenged to prepare critical-thinking practitioners who are able to address technological challenges in today's economy.

What You Will Learn
Hands-on, industry-relevant skills

In the Bachelor of Technology (BTech) program, you'll build on your strong technical background, adding leadership and critical-thinking skills you'll need to take on management and supervisory roles. You'll gain a global perspective, focusing on social, economic and environmental issues.

You'll also develop skills in:

  • Innovation, transition and change management
  • Effective multi-media communications
  • Planning and strategy development
  • Staffing and supervision
  • Critical thinking and problem-solving

24 month

Duration

$ 23310

Tuition

View All Courses by Northern Alberta Institute of Technology (NAIT), Canada

Top Study Abroad Exams

GRE Exam

The Graduate Record Exam (GRE) is a necessary and popular enteryway exam that learners must pass in order to be acc.. Red More

GMAT Exam

The Graduate Management Admission Test (GMAT) is a well-know evaluation for being accepted into MBA programs. Per... Read More

SAT Exam

The SAT is a Standardized evaluation that is necessary for enrolling in underaduate cur... Read More

Popular Universities to Study Abroad

Study in Canada
Study in USA
Study in UK
Study in NZ
Study in India
Study in UAE

Explore Colleges and Courses in Canada

Popular States
Popular Cities
Popular Streams

Latest Blog Posts

Trending Blog Posts

edmission

Search, Shortlist, Apply and get accepted! It’s that Simple to pursue your dream to Study abroad with Edmissions. Our team of experts provide you the right guidance that helps you to take admission in your dream college in countries like Canada, the USA, the UK

© 2021-2024 Edmissions - All rights reserved.

TALK TO OUR EXPERTS

whatsapp