Diploma in Personal Fitness Trainer

at Northern Alberta Institute of Technology (NAIT) Canada

Medical Radiologic Technology is the art and science of correctly positioning the patient and X-ray equipment to produce and record images for the purpose of visualizing the extent of disease or injury to a patient. The majority of X-ray examinations are performed in the Diagnostic Imaging Department; however, they are also carried out in the operating room, in the emergency department, on wards and in specialized intensive care units.

The Medical Radiologic Technology program teaches students how to perform X-rays, including evaluating the diagnostic quality of images, patient care and quality control. Students also gain expert knowledge in radiation safety and protection practices. Many of the radiographic examinations and procedures involve working alongside physicians, other technologists, nurses and non-medical personnel.
 

Environmental Monitoring & Assessment students investigate the impact of human activities on air, water, soil and vegetation, and gain a solid foundation in environmental sampling, assessment and laboratory skills. Students learn how to monitor and assess environmental quality, apply principles of quality assurance/quality control, manage waste, and reclaim and remediate land. Graduates may conduct environmental site assessments, collect samples from surface and ground water, air, soil and waste, or analyze samples for pollutants in an environmental lab. They work with industry, consultants or government on land and water remediation and reclamation, and investigate environmental issues for various research groups.

Hands-on, industry-relevant skills
During the first semester, you'll acquire skills and knowledge in the general sciences of biology and chemistry, communications, ethics, botany, zoology, genetics, and lab techniques and calculations.

You'll then be trained in the following areas
Field Skills:

• Perform field analysis of soil, vegetation and water quality
• Monitor air pollutants
• Collect environmental samples from air, water, soil, plants and waste for further lab analysis
• Conduct environmental site assessments – ESA (Phase I - III)
• Maintain and calibrate field equipment for environmental sampling

Additional Skills:

• Design and manage group-based projects
• Measure effects of pollutants on the environment by studying toxicology
• Use current solid and hazardous waste treatment technologies and monitoring systems
• Use legislation and standards related to environmental issues
• Employ pollution prevention and pollution control technologies
• Use quality assurance and quality control (QA/QC) principles to obtain accurate data
• Generate and keep detailed log books
• Compile and manage data using MS Office
• Write reports, perform literature reviews, and prepare and give presentations

Businesses and organizations are finding ways to become smarter, more efficient and make better decisions. Data has become a key aspect in finding a competitive advantage and predicting the future.

Data analytics is a field that combines data, technology, processes and analysis to enhance business decisions and drive success. The Data Analytics post-diploma certificate program provides you with the skills needed to inform real-world business decision-making and planning through data insights, analysis, visualizations and predictions.

Play a key role in an organization by mastering the art of converting data into information and turning information into action

What You Will 
Data-driven, industry-relevant skills
This post-diploma certificate builds on foundational knowledge and skills acquired in related diploma programs and prepares graduates for employment in the field of data analytics.

This 10-course program, which may be completed full- or part-time, will prepare you for Data Analyst roles in a wide variety of industries. Upon successful completion of the program, you will be able to:

• Design and assemble data sets for further manipulation and analysis
• Interpret data sets and communicate findings to make data-driven decisions and support organizational goals
• Use data analytics to provide business insights and organizational opportunities.
• Apply security, privacy, ethics, regulations and information and data management principles throughout the data lifecycle
• Use industry leading artificial intelligence, machine learning and analytics tools to analyze, interpret and present data

The Digital Media and IT (DMIT) program is multi-disciplinary in its approach. Spanning a range of career opportunities from business analyst to visual designer, this innovative program allows you the ability to meet industry demand while developing skills aligned with your individual talents and inclinations.

In the Game Programming area of emphasis, you will learn how to give life to video games. You will create and implement game code and scripts that support environments, characters, vehicles, cameras and special effects and allow them to interact with each other.

What You Will Learn
Hands-on, industry-relevant skills
The courses in this area of emphasis offer a multi-language approach to object-oriented programming (OOP), which is an approach to designing modular, reusable software systems. You'll also learn how multi-language programming functions on various game engines and platforms.

You will become familiar with programming languages such as C++, C# and JavaScript, languages that are at the core of game programming. You will then learn how to plan and create small games – on your own as well as with your classmates.

Co-op Opportunities
As a result of DMIT's close connection with industry, various co-op opportunities exist for students in the DMIT program. Many companies offer our students paid co-op positions that provide direct experience in specific areas of study. Co-op is also seen as a staffing strategy for many organizations.

Diagnostic Medical Sonographers are highly trained, in-demand professionals who use ultrasounds to produce and record images of important organs, masses and fetal images. This hands-on accredited program will allow you the opportunity to participate in clinical rotations in major Alberta hospitals. You’ll receive training on industry-standard equipment and get the opportunity to learn on the same technology you’ll use in your practicum placement – and career.

The Digital Media and IT (DMIT) program is multi-disciplinary in its approach. Spanning a range of career opportunities from business analyst to visual designer, this innovative program allows you the ability to meet industry demand while developing skills aligned with your individual talents and inclinations.

The Animation area of emphasis prepares you for jobs in films, games, architectural visualization, industrial simulations, concept design and illustration.

Hands-on, industry-relevant skills
The DMIT - Animation area of emphasis will set you up with skills in all areas of the animation process, including story development, character design, drawing fundamentals, modeling, texturing, rigging, animating, special effects, lighting, rendering and editing.

First-year courses establish a solid foundation in classical drawing and 3D modelling. More advanced courses offer you experience with:

• Digital sculpting
• Rigging
• Character animation
• Video editing
• Motion graphics and compositing, including integrating 2D and 3D elements into live action footage

In this area of emphasis, you will learn using the most current techniques and tools from the industry today, and be well-prepared for a career in animation.

Co-op opportunities
As a result of DMIT's close connection with industry, various co-op opportunities exist for students in the DMIT program. Many companies offer our students paid co-op positions that provide direct experience in specific areas of study. Co-op is also seen as a staffing strategy for many organizations.

The healthcare industry continues to see a rapid increase in the usage of advanced medical diagnostic and therapeutic equipment to provide the highest level of patient care possible. As our dependence on high-tech equipment and technical expertise required by medical professionals increases, so have the technology-related risks to patients and clinical staff.

Biomedical engineering technologist careers have evolved to help manage technology-related risks in the health-care industry through the entire lifecycle of medical devices, including specification, inspection, calibration, repair and maintenance, and technical troubleshooting.

The Biomedical Engineering Technology program will provide you with fundamental knowledge and hands-on experience with electronics, microcontroller applications, computer network systems and medical imaging systems. You'll also become familiar with medical laboratory practices, anatomy, physiology and health technology management.

What You Will Learn
Hands-on, industry-relevant training
The Biomedical Engineering Technology program will provide you with the skills of an electronic technologist with a specialized focus on biomedical equipment technology.
In your first year of study you will learn about electronics, microcontroller programming, math and computer systems. 

• Biomedical instrumentation
• X-ray and diagnostic imaging equipment
• Medical laboratory instrumentation

Supplementary courses in anatomy and physiology and medical equipment management complete the medical specialization.

Co-op
Students may be eligible to participate in a one semester co-op placement between their first and second year of training. Successful co-op students work in a program related, industry position and gain advanced job-readiness skills. Acceptance into co-op requires successful completion of first term coursework with a GPA of 2.3. 

The new Automotive Service Technology diploma is a unique opportunity to get the technical and career essential skills you need to succeed in the automotive industry. It can also serve as a pathway to apprenticeship.

This two-year diploma provides exposure to new trends and technologies. Once you complete the program, you will have the knowledge, skills and hands-on experience in dynamic shop environments to diagnose vehicle systems, and repair and maintain vehicles.

The diploma program offers a direct pathway into trades training at NAIT without having to first be a registered apprentice. After graduating, you will be eligible to enter the job market having all apprenticeship technical training completed.

What You Will Learn
Industry-approved training
A career in the automotive industry calls for an understanding of both technical knowledge and career essential skills.  Learning outcomes for this program include being able to:

• Identify safety hazards and comply with legislation
• Diagnose vehicle systems
• Repair and maintain vehicles
• Select and use tools and equipment for diagnosis and repair of vehicles
• Describe and discuss automotive systems and component operation
• Demonstrate written and verbal communication skills

Computers play role in every segment of modern society. Growing demand and advances in miniature, solid-state microprocessor technology have sparked the development of smaller, less expensive and more powerful computers, and increased the need for well-trained technical personnel.
In the 2-year Computer Engineering Technology diploma program, you'll design, build and program computers, gain skills in the hardware and software aspects of microcomputers and their applications, and receive extensive hands-on training.

Hands-on, industry-relevant skills
In Computer Engineering Technology, you'll be trained in both computer hardware and software, including concepts related to computer architecture fundamentals, industrial electronics and embedded controllers using analog and digital integration. You'll become fluent in the assembly language programming of micro-controllers, advanced programming languages such as C#, Windows application development, database concepts and dynamic web development.
Our hands-on learning environment and industry focus will provide you with the skills and knowledge you'll need to secure a rewarding career as a computer engineering technologist.

In this program, you'll learn about:

• Computer programming, including C#, SQL, HTML5+, CSS3, PHP5, ASP.NET, JavaScript, AJAX, jQuery and ladder logic on PLCs to monitor and control industrial equipment
• System analysis and design
• Electronic circuit design, implementation, debugging, simulation and measurement
• Embedded system implementation
• Interfacing sensors, actuators and other electronic device to computer platforms
• Hardware design and interfacing
• Analytical thinking and problem-solving skills
• Oral and written communication skills
• Interpersonal and teamwork skills
• Time management and other professional skills

Co-op option
This program has a co-op option that will be available to you once you've completed at least 2 academic terms. This hands-on work expereince will provide career development training, enabling you to build advanced job readiness skills.

Over 10,000 employees are injured at work in Alberta every year. Some are seriously injured, even killed.

As a result, organizations across the province continue to invest more time and resources to better train and equip their personnel, identify potential dangers and develop strategies and policies that keep employees safe.

The NAIT Occupational Health & Safety (OHSD) diploma program will prepare you to fill essential health and safety roles in industry to meet the growing demands of government regulations.

Our 2-year program focuses on real-world issues and practical skills and is the only program in the province that offers full-time OHS training. We are recognized by the Board of Canadian Registered Safety Professionals, and our graduates meet the educational requirements for Canadian Registered Safety Professional (CRSP) certification, the most recognizable designation for safety professionals in Canada.

Over 5 terms, you’ll be provided with classroom and lab instruction, as well as applied learning opportunities in a variety of workplace settings.

Co-Op Work Term
Your co-op work term will give you the opportunity to apply your professional skills and theoretical understanding in a workplace setting. You’ll be given various occupational health and safety responsibilities and projects in a business, industry, government, education or non-profit organization. 

In addition to providing new learning experiences, the work term will give you valuable on-the-job skills and industry contacts that will set you up for success after graduation.