Master of Science in Engineering - Biomedical Engineering

at Shorelight Group - Johns Hopkins University USA

Meet workforce demands with knowledge from Johns Hopkins Engineering’s challenging courses and a modern curriculum covering a broad range of topics in chemical and biomolecular engineering. From biotechnology to nanotechnology and the environment, studies in this master’s degree program will prepare you for leadership positions in multiple industries, including biopharma, energy, electronics, and green manufacturing for fuels and chemicals. Faculty are accomplished researchers, scientists, and practitioners. As a graduate, you will be well prepared to:

• Apply chemical engineering knowledge to solve pharmaceutical process problems, including understanding the constraints in regulatory requirements that affect drug development.
• Solve open-ended complex engineering problems in colloid and interfacial science.
• Demonstrate proficiency in using mathematical tools and formalism to problem solve.
• Take on advanced roles and progress as a leader in the field.

The Master of Arts (MA) in Geography and Environmental Engineering is housed in the Whiting School of Engineering (WSE) on the Homewood campus. Students in this program have the unique opportunity to take classes on both the WSE Homewood and JHSPH East Baltimore campuses in order to complete their degree requirements.

The MA in Geography and Environmental Engineering is a degree program open to students with undergraduate degrees in social sciences or the humanities. Three semesters of coursework are typically required to complete the degree and MA students have the option to complete an independent research project, submitted as a formal essay. Students can focus on one of the Department’s areas of interest or construct their own program that complements and expands their undergraduate experience.

Each individual’s program of study is planned by the student in consultation with department faculty and must be approved by the faculty adviser.

The MA degree is open to students with undergraduate degrees in social sciences or the humanities.

The Center for Bioengineering Innovation and Design (CBID), housed in the Department of Biomedical Engineering, focuses on the design aspect of Biomedical Engineering. This exciting program gives students opportunities to design, develop, build, and test devices that solve some of the most pressing problems facing clinicians today.

The mission of CBID is to:

• Improve human health by developing medical devices that solve important clinical problems
• Educate a new generation of medical device engineers and fellows
• Facilitate technology transfer and industry collaboration

In the graduate program CBID students will learn to identify clinical needs and innovate a novel solution to solve that clinical problem. Working in teams, students work closely with engineering faculty and physicians throughout the medical institution to come up with device ideas, build prototypes, research intellectual property, learn about the regulatory process, write business plans, and present their designs to fellow students, faculty, and outside advisors.

Undergraduate students in BME can also become involved in medical device design by joining an undergraduate design team which works on solving clinical problems by designing innovative devices.

Incorporated in all the BME design curriculum is a focus on technology commercialization. All students, graduate and undergraduate, will interact with clinical and corporate sponsors and have experiences that promote the development of leadership, communications, and marketing skills, thus helping to ensure our graduates’ professional success.

Johns Hopkins Engineering for Professionals Electrical and Computer Engineering online, part-time master’s program is one of the largest in the country. And our highly regarded program is one of the best, ranked #5 by U.S. News & World Report.

We value the opportunity to create a hands-on experience. That’s why each student can remotely connect to equipment on campus to conduct measurements. We offer a wide breadth of courses to align with your area of expertise and interests, from computer engineering to satellite communications (instructed by a professor involved in NASA’s New Horizons Pluto mission) to systems and controls.

From a thorough grounding in foundational topics such as electromagnetics, electronic devices, and systems theory, to building the hardware and software architectures of next-generation mobile platforms, students gain valuable skills and knowledge and will be able to:

• Demonstrate the ability to apply advanced electrical and computer engineering theory and methods to translate functional system descriptions into component-level designs and structures.
• Demonstrate the ability to design and conduct experiments or simulations, as well as analyze and interpret the results.
• Demonstrate proficiency in the use of advanced mathematical and analytical techniques and modern engineering tools necessary for engineering practice.

Each graduate student will normally have one or more faculty advisors. Students who are entering the M.S.E. program and plan to pursue a degree without an essay will be assigned an academic advisor. Students who are entering the M.S.E. program and plan to pursue a degree with an essay will be advised by their research advisor. Students who are entering the Ph.D. program will be advised by their research advisor. Students with a research advisor in another department will be assigned an internal academic advisor from among the full-time faculty in the department. Student progress will be assessed regularly by the faculty advisor(s) and the Graduate Program Committee. Students are expected to remain in regular communication with their faculty advisor(s).

Each student’s progress will be reviewed annually by the Graduate Program Committee, in consultation with the student’s advisor(s). To assist in this evaluation, students are required to submit a form (available from the academic program coordinator) detailing progress toward completion of the degree requirements. This form must be signed by the student’s advisor(s) and filed with the Graduate Program Committee each year. The department must be convinced that all academic requirements have been satisfied by the candidate before a recommendation to confer a graduate degree is passed on to the University Graduate Board.

Grade requirements for graduate course work differ according to the degree program, as described below. All graduate students are required to maintain an overall grade point average (GPA) of 3.0 or higher; failure to do so will ordinarily be cause for dismissal from the program. Independent research courses will not be counted toward completion of course requirements.

The department believes that teaching experience is important to professional growth; therefore, a student may be required to serve as a teaching assistant during his or her academic career.

The department offers a variety of options to earn the master's degree, known as the Masters of Science and Engineering degree in Mechanical Engineering.

Essay Option
Students writing an essay will successfully complete a coordinated sequence of eight courses and graduate research, and submit a master’s essay (sometimes known as a “thesis”). The degree typically requires three to four semesters of study.

There are two options to complete the essay:

• Conduct Laboratory Research
  • Work with world-renowned engineering professors by conducting original research to produce an essay worthy of publication.
  • Learn more about the Research option here!
• Work in a Cooperative Educational Environment (Co-Op)
  • To broaden the practical training for master’s students, the Institute for Nanobiotechnology (INBT) teams with companies to provide an immersive master’s industry “co-op” experience in a professional working environment. Goals and objectives are developed for the student in conjunction with faculty and INBT academic advisors, which will be used to complete the master’s essay.
  • Learn more about the Co-Op program here!

The Data Science Master’s degree at the Johns Hopkins University will provide the training in applied mathematics, statistics and computer science to serve as the basis for an understanding, and appreciation, of existing data science tools.  Our program aims to produce the next generation of leaders in data science by emphasizing mastery of the skills needed to translate real-world data-driven problems in mathematical ones, and then solving these problems by using a diverse collection of scientific tools

The final Capstone Experience in Data Science (EN.553.806) is a research-oriented project which must be approved by the research supervisor, academic advisor and the Internal Oversight Committee.  The Capstone Experience can be taken in multiple semesters, but the total number of credits required for successful completion is six (6). The goal of the final course and written paper is to allow the student to apply data analysis techniques learned in the program, and possibly to extend those ideas to more general settings or to new application areas.  Lastly, the paper will be summarized in a poster session organized at the end of each semester.

Students in this degree program may follow requirements for a concentration in Nanotechnology or may choose electives to focus their studies in areas such as Biotechnology or Nanomaterials. However, a concentration or a focus area is not required for the program. Students can fulfill degree requirements taking courses in the Materials Science and Engineering Program along with materials-related courses from other Engineering for Professionals programs.

The flagship educational experience offered by Johns Hopkins University in the area of information security and assurance is represented by the Master of Science in Security Informatics (M.S.S.I.) degree. A wide range of courses is available in support of this unique and innovative graduate program.

The M.S.S.I. is a full-time day program offered on the Homewood Campus in North Baltimore. Most students complete the program in three full-time semesters though some graduate students may finish their degree part-time after completing the required two consecutive semesters of residency as a full-time student.

The Occupational and Environmental Hygiene, Master of Science program is accredited by the Accreditation Board for Engineering and Technology (ABET) Applied and Natural Science Accreditation Commission (ANSAC) and is designed to prepare students to pass the Certified Industrial Hygienist (CIH) examination administered by the American Board of Industrial Hygiene (ABIH).

All Occupational and Environmental Hygiene, Master of Science core curriculum courses are offered through the Bloomberg School of Public Health, so students will need to follow this academic calendar.

The Bloomberg School of Public Health operates on a term system rather than a semester system. There are 4 numbered terms in the regular academic year as well as a summer institute and a winter intersession. The academic terms are 8 weeks in length and the institutes/intersessions are 2 weeks each. Part-time/Online Occupational and Environmental Hygiene, Master of Science students are required to come to campus for courses that do not translate to an online format (laboratory and field trip-based courses). These courses are held during the summer institute and winter intersession. Students will attend 2 summer institutes and one winter intersession over the course of their degree program.

Students must be employed in the industrial hygiene or safety fields since all students are required to complete an independent professional project as part of their degree and in most instances, this is completed at the student’s place of employment.  

Prior education must include (1) an undergraduate degree from a regionally accredited four-year college or university, (2) successful completion of college-level courses in biology, chemistry, calculus and physics.

Applicants whose prior education does not include the prerequisites listed above may still enroll under provisional status, followed by full admission status once they have completed the missing prerequisites. Courses completed at a local community college are acceptable.