Diploma in Automotive Technology

at Red River College Polytechnic - Notre Dame Campus Canada

This program gives you an understanding of the basic purpose, construction, operation, and service of component parts and assemblies of an automobile.
You will develop the knowledge and skills required to disassemble, inspect, machine, calibrate and reassemble motor vehicle units and components. You will study internal combustion engines, automatic and standard transmissions, brakes, steering, electrical circuits, wiring, and fuel systems.
Most training will take place at RRC’s auto mechanics workshop, an environment that will give you the practical experience required for industry employment. You will also acquire industry work experience as part of this program.
Prior to starting the program, you will be invited to attend a program overview information session. You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.

Civil Engineering Technology is a cluster of diploma programs that provides students with career training in construction engineering, environmental engineering, and geomatics technologies.

During the first year, you will acquire generic competencies in common core courses in the following areas:

• Algebra and trigonometry (M)
• Chemistry
• Statics and strength of materials (M)
• Surveying (M)
• Technical communications
• Computer applications
• Technical drafting
• WHMIS
• General Safety Trainin

Important Advisory Note: Courses designated (M) are high in mathematical content.  If you have weak mathematical skills, or if you completed Essentials Math in high school (instead of the recommended Applied Math or Pre-Calculus Math), it is strongly recommended that you take the preparatory Mathematics for Technology course available throughout Continuing Education at RRC, prior to beginning the program.

Prior to starting the program, you will be invited to attend a program overview information session.  You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.  Although the diagnostic testing is optional, we strongly recommend that you participate.  Should your results be lower than a C (60%) you would benefit from taking the Mathematics for Technology course as a pre-program refresher.

After completion of the first year courses, you would then apply and develop these competencies during a six-month co-operative education work term.

In the second and third years*, you take more advanced courses and build on the competencies you gained in first year. The focus is on application and design. To enter into subsequent terms (both academic and co-op), and to graduate, you need a minimum cumulative term grade point average (CGPA) of 2.00.

This program prepares you for a career as a manufacturing technician with knowledge of manufacturing processes including conventional machining and metal forming operations, composites, and advanced manufacturing methods.

Heavy emphasis is placed on:

• Computer Numerical Control (CNC) machine operation and programming
• Computer Aided Design (CAD)/Computer Aided Manufacturing (CAM)
• Jig and fixture design

The program also gives you an introduction to robotics and automation, non-destructive testing, dimensional metrology, and quality inspection methods.
Upon completion of the program you will receive a Manufacturing Technician Diploma.
Prior to starting the program, you will be invited to attend a program overview information session. You will also be invited to participate in a math and reading skills diagnostic testing session that will advise you of your program readiness.

Gain the knowledge and skills needed to work in therapeutic and leisure recreational programming and services for older adults. You will learn to plan, promote, deliver and evaluate effective programs for clientele in various settings, including: personal care homes, extended hospital care, adult day centres, assisted living and other community based programs.

Workplace safety, privacy and health regulations are key components of the program. You will be taught by industry-experienced instructors through integrated workplace experience and two field work placements.

Prepare for a range of career opportunities while exploring advanced technologies, including computer-aided manufacturing (CAM) programming, advanced multi-axis CNC machining, additive manufacturing (3D Printing) and robotics and automation. You will be able to gain hands-on training through a work practicum elective.

CO-OP/Practicum Information
An optional work integrated term that integrates classroom theory and shop experience with related on-the-job training. This program includes two weeks of unpaid work experience. This work integrated learning experience will help you to have credible experience in your profession before graduation.

The Truck Transport Technology program gives you the necessary skills required to diagnose and repair today’s truck transport vehicles. Training alternates between in class, live shop and work experience. Classroom instruction will broaden your knowledge in truck transport electronics as well as strategies required for diagnosis of engine management systems, fuel injection and abs brakes.

• Main subject areas include electrical diagnosis, electronics, ignition systems, engines, drive-lines, steering and suspension, brakes and fuel system.
• Second-year students will have the opportunity to be involved in chassis and engine dynamometer projects in areas of emissions analysis, cold weather testing of hybrid and electrical vehicles and engine performance.
• Upon graduation, students will receive a level two apprenticeship accreditation.

This program is specifically targeted to students with technical diplomas and degrees. The program offers a condensed, accessible solution to the demand for advanced management training by providing technologists and others with the knowledge and skills required to perform as supervisors or managers in technical organizations.

The program complements your current technical skills with important managerial skills. After successfully completing this program you will demonstrate the knowledge, skills, and abilities to do the following:

• Adapt to changing technological environments
• Develop management strategies and business plans
• Identify market opportunities and develop and implement marketing strategies
• Manage research and development or technical projects
• Understand organizational diversity, manage it effectively, and build multi-disciplinary teams
• Create budgets and apply the principles of economics, accounting, and finance
• Apply oral, written, and interpersonal communication skills

Benefits of the full-time program include:

• Flexible entrance requirements providing access to a management program designed specifically for technologists and technology-intensive environments
• Affordability by offering a comprehensive program at a fraction of the cost of other post-graduate management training
• Condensed timelines, as the program can be completed in just eight months (one academic year) of full-time study

Red River College’s full-time, online Administrative Assistant program focuses on the administrative and technical skills needed to meet the demands of the current and emerging office environment, both locally and internationally.

Skills learned in the program are immediately applicable in the workforce.

After successful completion of the program, you will be knowledgeable in a variety of technical and soft skills, including business office software, administrative procedures, communication, event planning and teamwork, bookkeeping and accounting, payroll and problem solving.

This program trains you for entry-level employment as an engineering technologist in the electrical industry, which provides a broad range of employment opportunities. You develop the conceptual knowledge base and troubleshooting skills to prepare you for a range of roles that include design, installation, maintenance, production, and technical sales and support.

Topics in the program include:

• Use and application of programmable logic controllers (PLCs), variable frequency motor drives (VFDs), soft starters, and data communication to link all of the preceding elements for the control of manufacturing systems.
• Planning, designing, and specifications of power systems with motor protection for buildings and industrial plants. You will generate AutoCAD drawings, calculate short circuit currents, and coordinate fuses, circuit breakers, and protective relays. Canadian Electrical Code instruction is delivered by journeyman electricians.
• Hydro electric power generation, transmission, and distribution systems with a view to operation, control, and protection.
• Assessment of power system harmonics concerns by measuring TDD and THD and offering solutions to improve performance.

Note: First year of the program will be held at the Exchange District Campus before transferring to the main Notre Dame Campus for the rest of the program.

This program will provide you with a fundamental understanding of occupational health and safety. The program addresses the role and responsibilities of an occupational health and safety practitioner including:

• Risk management
• Hazard recognition, control, and prevention
• Safety management systems in the workplace

The program incorporates a multi-disciplinary appr

This program will provide you with a fundamental understanding of occupational health and safety. The program addresses the role and responsibilities of an occupational health and safety practitioner including:

    Risk management
    Hazard recognition, control, and prevention
    Safety management systems in the workplace

The program incorporates a multi-disciplinary approach in contributing to the development of a health and safety culture.

Red River College is continually evaluating programs to ensure that the program best meets student needs and industry standards. See Recent Changes section regarding revisions to the full-time program.

oach in contributing to the development of a health and safety culture.